250x100x150 54С Grinding wheel Type-6 F46 30 m/s on Ceramic bond K 8

Out of stock
SKU
315375-10036
$58.02
More Information
Bond Ceramic
Wheel type 6
D - top diameter 250
T - wheel thickness 100
H - hole diameter 150
Abrasive 54С
Grain it FEPA F46
Hardness K
Structure 8
Angle speed 30
Manufacturer ZAK
Country Ukraine

250×100×150 mm 54C Grinding Wheel – Type 6 – F46 – 30 m/s – Vitrified bond – Grade K – Structure 8

Type 6 abrasive grinding wheel (straight cup wheel) in size 250×100×150 mm.
The cup geometry works primarily on its face and is used for surface grinding and tool sharpening on compatible machines.

The specification is intended to provide predictable cutting action and stable development of the working surface.

What it actually does:

FEPA grit F46 positions this wheel for general roughing and semi-finishing.
Correct bore fit and flange compatibility are particularly important for this wheel configuration.

Abrasive 54C — black silicon carbide:

A hard, sharp abrasive for low-tensile-strength materials and hard non-metallic surfaces.

  • Cast iron
  • Non-ferrous metals and alloys
  • Stone, glass and selected ceramic materials

FEPA grit size F46:

Medium grain size for bonded abrasive products.

  • Productive material removal
  • Suitable for establishing geometry
  • Leaves the surface ready for further finishing when tighter requirements apply

Vitrified bond:

  • Provides strong form retention
  • Can be dressed accurately
  • Its porous matrix helps remove chips and heat

Limitation: Vitrified wheels are sensitive to impact and unauthorised side loading.

In practice:

Use a grinding load that keeps the grains cutting rather than rubbing continuously against the workpiece.

Specification:

  • Type: 6 (straight cup wheel)
  • Size: 250×100×150 mm
  • Outside diameter D: 250 mm
  • Wheel thickness T: 100 mm
  • Bore diameter H: 150 mm
  • Abrasive: 54C, black silicon carbide
  • Grit: FEPA F46
  • Wheel grade: K
  • Structure: 8
  • Bond: vitrified
  • Maximum operating speed: 30 m/s

Wheel grade K:

Medium-soft bond-holding characteristic.

  • Supports regular renewal of cutting edges
  • Performs well under moderate loading
  • Requires monitoring of wheel wear and profile retention

Structure 8:

Open wheel structure.

  • More chip clearance
  • Improved coolant access to the grinding zone
  • Reduced risk of wheel loading during prolonged contact

Use for:

  • Face grinding of flat surfaces
  • Tool sharpening with the cup face
  • Cast iron
  • Non-ferrous metals and alloys
  • Stone, glass and selected ceramic materials

Do not use for:

  • General-purpose grinding of carbon and alloy steels
  • Operations with severe impact on the brittle abrasive grain
  • Side loading unless specifically permitted by the wheel design
  • Operation above 30 m/s

Before mounting, inspect the wheel for damage and confirm bore fit, mounting method and machine compatibility. Use the correct guard and follow the machine operating instructions.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
© Copyright - e-Store "Razvertka" Tokar tools - production and sale of tools You may not copy, reproduce, modify, publish, upload, transmit, and distribute any elements of this site, as well as their components, by any means and in any media without prior written permission.