150x80x51 14А Grinding wheel Type-6 F46 30 m/s on Ceramic bond K 6

Out of stock
SKU
311372-10002
$14.66
More Information
Bond Ceramic
Wheel type 6
D - top diameter 150
T - wheel thickness 80
H - hole diameter 51
Abrasive 14А
Grain it FEPA F46
Hardness K
Structure 6
Angle speed 30
Manufacturer ZAK
Country Ukraine

150×80×51 mm 14A Grinding Wheel – Type 6 – F46 – 30 m/s – Vitrified bond – Grade K – Structure 6

Type 6 abrasive grinding wheel (straight cup wheel) in size 150×80×51 mm.
The cup geometry works primarily on its face and is used for surface grinding and tool sharpening on compatible machines.

Consistent results require the correct combination of feed, dressing, coolant application and contact area.

What it actually does:

FEPA grit F46 positions this wheel for general roughing and semi-finishing.
Correct bore fit and flange compatibility are particularly important for this wheel configuration.

Abrasive 14A — regular aluminium oxide:

A tough aluminium oxide grain designed for productive grinding of materials with high tensile strength.

  • Carbon and low-alloy steels
  • Steel billets, forgings and castings
  • Rough and semi-finish grinding

FEPA grit size F46:

Medium grain size for bonded abrasive products.

  • Productive material removal
  • Suitable for establishing geometry
  • Leaves the surface ready for further finishing when tighter requirements apply

Vitrified bond:

  • Provides strong form retention
  • Can be dressed accurately
  • Its porous matrix helps remove chips and heat

Limitation: Vitrified wheels are sensitive to impact and unauthorised side loading.

In practice:

Use a grinding load that keeps the grains cutting rather than rubbing continuously against the workpiece.

Specification:

  • Type: 6 (straight cup wheel)
  • Size: 150×80×51 mm
  • Outside diameter D: 150 mm
  • Wheel thickness T: 80 mm
  • Bore diameter H: 51 mm
  • Abrasive: 14A, regular aluminium oxide
  • Grit: FEPA F46
  • Wheel grade: K
  • Structure: 6
  • Bond: vitrified
  • Maximum operating speed: 30 m/s

Wheel grade K:

Medium-soft bond-holding characteristic.

  • Supports regular renewal of cutting edges
  • Performs well under moderate loading
  • Requires monitoring of wheel wear and profile retention

Structure 6:

Medium wheel structure.

  • Balanced grain and pore volume
  • Stable form retention
  • Predictable performance under consistent loading

Use for:

  • Face grinding of flat surfaces
  • Tool sharpening with the cup face
  • Carbon and low-alloy steels
  • Steel billets, forgings and castings
  • Rough and semi-finish grinding

Do not use for:

  • Cemented carbide and technical ceramics
  • Precision grinding of hardened steel where a cooler-cutting friable grain is required
  • Side loading unless specifically permitted by the wheel design
  • Operation above 30 m/s

Before mounting, inspect the wheel for damage and confirm bore fit, mounting method and machine compatibility. Use the correct guard and follow the machine operating instructions.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
© Copyright - e-Store "Razvertka" Tokar tools - production and sale of tools You may not copy, reproduce, modify, publish, upload, transmit, and distribute any elements of this site, as well as their components, by any means and in any media without prior written permission.