200x40x76 54С Grinding wheel Type-5 F46 35 m/s on Ceramic bond СМ2 7

Out of stock
SKU
315328-39
$30.43
More Information
Bond Ceramic
Wheel type 5
D - top diameter 200
T - wheel thickness 40
H - hole diameter 76
Abrasive 54С
Grain it FEPA F46
Hardness СМ2
Structure 7
Angle speed 35
Manufacturer ZAK
Country Ukraine

200×40×76 mm 54C Grinding Wheel – Type 5 – F46 – 35 m/s – Vitrified bond – Grade СМ2 – Structure 7

Type 5 abrasive grinding wheel (single-recessed straight wheel) in size 200×40×76 mm.
The recess provides flange clearance and positions the working periphery relative to the machine spindle assembly.

This wheel size is intended for stationary grinding under parameters matched to the machine and workpiece material.

What it actually does:

FEPA grit F46 positions this wheel for general roughing and semi-finishing.
Correct bore fit and flange compatibility are particularly important for this wheel configuration.

Abrasive 54C — black silicon carbide:

A hard, sharp abrasive for low-tensile-strength materials and hard non-metallic surfaces.

  • Cast iron
  • Non-ferrous metals and alloys
  • Stone, glass and selected ceramic materials

FEPA grit size F46:

Medium grain size for bonded abrasive products.

  • Productive material removal
  • Suitable for establishing geometry
  • Leaves the surface ready for further finishing when tighter requirements apply

Vitrified bond:

  • Provides strong form retention
  • Can be dressed accurately
  • Its porous matrix helps remove chips and heat

Limitation: Vitrified wheels are sensitive to impact and unauthorised side loading.

In practice:

Use a grinding load that keeps the grains cutting rather than rubbing continuously against the workpiece.

Specification:

  • Type: 5 (single-recessed straight wheel)
  • Size: 200×40×76 mm
  • Outside diameter D: 200 mm
  • Wheel thickness T: 40 mm
  • Bore diameter H: 76 mm
  • Abrasive: 54C, black silicon carbide
  • Grit: FEPA F46
  • Wheel grade: СМ2
  • Structure: 7
  • Bond: vitrified
  • Maximum operating speed: 35 m/s

Wheel grade СМ2:

Medium-soft bond-holding characteristic.

  • Supports regular renewal of cutting edges
  • Performs well under moderate loading
  • Requires monitoring of wheel wear and profile retention

Structure 7:

Moderately open wheel structure.

  • More chip clearance
  • Improved coolant access to the grinding zone
  • Reduced risk of wheel loading during prolonged contact

Use for:

  • Peripheral grinding
  • Operations requiring a single-recess mounting arrangement
  • Cast iron
  • Non-ferrous metals and alloys
  • Stone, glass and selected ceramic materials

Do not use for:

  • General-purpose grinding of carbon and alloy steels
  • Operations with severe impact on the brittle abrasive grain
  • Side loading unless specifically permitted by the wheel design
  • Operation above 35 m/s

Before mounting, inspect the wheel for damage and confirm bore fit, mounting method and machine compatibility. Use the correct guard and follow the machine operating instructions.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
© Copyright - e-Store "Razvertka" Tokar tools - production and sale of tools You may not copy, reproduce, modify, publish, upload, transmit, and distribute any elements of this site, as well as their components, by any means and in any media without prior written permission.