We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
200x63x32 25А Grinding wheel Type-6 F46 30 m/s on Ceramic bond K 6
| Bond | Ceramic |
|---|---|
| Wheel type | 6 |
| D - top diameter | 200 |
| T - wheel thickness | 63 |
| H - hole diameter | 32 |
| Abrasive | 25А |
| Grain it FEPA | F46 |
| Hardness | K |
| Structure | 6 |
| Angle speed | 30 |
| Manufacturer | ZAK |
| Country | Ukraine |
200×63×32 mm 25A Grinding Wheel – Type 6 – F46 – 30 m/s – Vitrified bond – Grade K – Structure 6
Type 6 abrasive grinding wheel (straight cup wheel) in size 200×63×32 mm.
The cup geometry works primarily on its face and is used for surface grinding and tool sharpening on compatible machines.
These parameters balance stock removal, wheel life and surface quality for the intended operation.
What it actually does:
FEPA grit F46 positions this wheel for general roughing and semi-finishing.
Correct bore fit and flange compatibility are particularly important for this wheel configuration.
Abrasive 25A — white fused aluminium oxide:
A high-purity, sharp and friable grain that renews its cutting edges and helps reduce the risk of thermal damage.
- Hardened and tool steels
- High-speed and alloy steels
- Precision grinding and tool sharpening
FEPA grit size F46:
Medium grain size for bonded abrasive products.
- Productive material removal
- Suitable for establishing geometry
- Leaves the surface ready for further finishing when tighter requirements apply
Vitrified bond:
- Provides strong form retention
- Can be dressed accurately
- Its porous matrix helps remove chips and heat
Limitation: Vitrified wheels are sensitive to impact and unauthorised side loading.
In practice:
Use a grinding load that keeps the grains cutting rather than rubbing continuously against the workpiece.
Specification:
- Type: 6 (straight cup wheel)
- Size: 200×63×32 mm
- Outside diameter D: 200 mm
- Wheel thickness T: 63 mm
- Bore diameter H: 32 mm
- Abrasive: 25A, white fused aluminium oxide
- Grit: FEPA F46
- Wheel grade: K
- Structure: 6
- Bond: vitrified
- Maximum operating speed: 30 m/s
Wheel grade K:
Medium-soft bond-holding characteristic.
- Supports regular renewal of cutting edges
- Performs well under moderate loading
- Requires monitoring of wheel wear and profile retention
Structure 6:
Medium wheel structure.
- Balanced grain and pore volume
- Stable form retention
- Predictable performance under consistent loading
Use for:
- Face grinding of flat surfaces
- Tool sharpening with the cup face
- Hardened and tool steels
- High-speed and alloy steels
- Precision grinding and tool sharpening
Do not use for:
- Cemented carbide, glass and ceramics, where silicon carbide is generally more suitable
- Heavy snagging with severe impact loading
- Side loading unless specifically permitted by the wheel design
- Operation above 30 m/s
Before mounting, inspect the wheel for damage and confirm bore fit, mounting method and machine compatibility. Use the correct guard and follow the machine operating instructions.