750x45x350 54С Grinding wheel Type-40 F100 35 m/s on Bakelite bond Non-reinforced СМ1 8

Out of stock
SKU
325459-1
$421.03
More Information
Bond Bakelite
Wheel type 40
D - top diameter 750
T - wheel thickness 45
H - hole diameter 350
Abrasive 54С
Grain it FEPA F100
Hardness СМ1
Structure 8
Angle speed 35
Manufacturer ZAK
Country Ukraine

750×45×350 mm 54C Grinding Wheel – Type 40 – F100 – 35 m/s – Resinoid bond – Grade СМ1 – Structure 8

Type 40 abrasive grinding wheel (wheel with inserted mounting elements) in size 750×45×350 mm.
The Type 40 construction uses inserted elements for installation on the corresponding machine mounting assembly.

This specification is designed for controlled grinding based on the abrasive type, grit size, wheel grade and structure.

What it actually does:

FEPA grit F100 positions this wheel for finish grinding and final size correction.
Correct bore fit and flange compatibility are particularly important for this wheel configuration.

Abrasive 54C — black silicon carbide:

A hard, sharp abrasive for low-tensile-strength materials and hard non-metallic surfaces.

  • Cast iron
  • Non-ferrous metals and alloys
  • Stone, glass and selected ceramic materials

FEPA grit size F100:

Fine grain size for bonded abrasive products.

  • Shallower grinding marks
  • Controlled surface quality
  • Requires stable feed and timely dressing

Resinoid bond:

  • More resilient than a vitrified bond
  • Tolerates dynamic grinding loads
  • Suitable for productive stock removal

Limitation: The non-reinforced construction must be used only on compatible stationary equipment.

In practice:

Use a grinding load that keeps the grains cutting rather than rubbing continuously against the workpiece.

Specification:

  • Type: 40 (wheel with inserted mounting elements)
  • Size: 750×45×350 mm
  • Outside diameter D: 750 mm
  • Wheel thickness T: 45 mm
  • Bore diameter H: 350 mm
  • Abrasive: 54C, black silicon carbide
  • Grit: FEPA F100
  • Wheel grade: СМ1
  • Structure: 8
  • Bond: resinoid (Bakelite), non-reinforced
  • Maximum operating speed: 35 m/s

Wheel grade СМ1:

Medium-soft bond-holding characteristic.

  • Supports regular renewal of cutting edges
  • Performs well under moderate loading
  • Requires monitoring of wheel wear and profile retention

Structure 8:

Open wheel structure.

  • More chip clearance
  • Improved coolant access to the grinding zone
  • Reduced risk of wheel loading during prolonged contact

Use for:

  • Stationary grinding on specialised equipment
  • Operations for which the machine documentation specifies a Type 40 wheel
  • Cast iron
  • Non-ferrous metals and alloys
  • Stone, glass and selected ceramic materials

Do not use for:

  • General-purpose grinding of carbon and alloy steels
  • Operations with severe impact on the brittle abrasive grain
  • Side loading unless specifically permitted by the wheel design
  • Operation above 35 m/s

Before mounting, inspect the wheel for damage and confirm bore fit, mounting method and machine compatibility. Use the correct guard and follow the machine operating instructions.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
© Copyright - e-Store "Razvertka" Tokar tools - production and sale of tools You may not copy, reproduce, modify, publish, upload, transmit, and distribute any elements of this site, as well as their components, by any means and in any media without prior written permission.