We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
150x80x32 54С Grinding wheel Type-6 F54 30 m/s on Bakelite bond Non-reinforced L 4
| Bond | Bakelite |
|---|---|
| Wheel type | 6 |
| D - top diameter | 150 |
| T - wheel thickness | 80 |
| H - hole diameter | 32 |
| Abrasive | 54С |
| Grain it FEPA | F54 |
| Hardness | L |
| Structure | 4 |
| Angle speed | 30 |
| Manufacturer | ZAK |
| Country | Ukraine |
150×80×32 mm 54C Grinding Wheel – Type 6 – F54 – 30 m/s – Resinoid bond – Grade L – Structure 4
Type 6 abrasive grinding wheel (straight cup wheel) in size 150×80×32 mm.
The cup geometry works primarily on its face and is used for surface grinding and tool sharpening on compatible machines.
This specification is designed for controlled grinding based on the abrasive type, grit size, wheel grade and structure.
What it actually does:
FEPA grit F54 positions this wheel for semi-finish grinding with controlled stock removal.
Correct bore fit and flange compatibility are particularly important for this wheel configuration.
Abrasive 54C — black silicon carbide:
A hard, sharp abrasive for low-tensile-strength materials and hard non-metallic surfaces.
- Cast iron
- Non-ferrous metals and alloys
- Stone, glass and selected ceramic materials
FEPA grit size F54:
Medium-fine grain size for bonded abrasive products.
- Balanced cutting performance
- A more uniform surface than coarse grits
- Suitable preparation for a finishing pass
Resinoid bond:
- More resilient than a vitrified bond
- Tolerates dynamic grinding loads
- Suitable for productive stock removal
Limitation: The non-reinforced construction must be used only on compatible stationary equipment.
In practice:
With a large contact area, chip clearance, coolant supply and timely opening of the wheel face become especially important.
Specification:
- Type: 6 (straight cup wheel)
- Size: 150×80×32 mm
- Outside diameter D: 150 mm
- Wheel thickness T: 80 mm
- Bore diameter H: 32 mm
- Abrasive: 54C, black silicon carbide
- Grit: FEPA F54
- Wheel grade: L
- Structure: 4
- Bond: resinoid (Bakelite), non-reinforced
- Maximum operating speed: 30 m/s
Wheel grade L:
Medium-soft bond-holding characteristic.
- Supports regular renewal of cutting edges
- Performs well under moderate loading
- Requires monitoring of wheel wear and profile retention
Structure 4:
Medium wheel structure.
- Balanced grain and pore volume
- Stable form retention
- Predictable performance under consistent loading
Use for:
- Face grinding of flat surfaces
- Tool sharpening with the cup face
- Cast iron
- Non-ferrous metals and alloys
- Stone, glass and selected ceramic materials
Do not use for:
- General-purpose grinding of carbon and alloy steels
- Operations with severe impact on the brittle abrasive grain
- Side loading unless specifically permitted by the wheel design
- Operation above 30 m/s
Before mounting, inspect the wheel for damage and confirm bore fit, mounting method and machine compatibility. Use the correct guard and follow the machine operating instructions.