We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
150x50x32 25А Grinding wheel Type-11 F60 30 m/s on Ceramic bond L 8
| Bond | Ceramic |
|---|---|
| Wheel type | 11 |
| D - top diameter | 150 |
| T - wheel thickness | 50 |
| H - hole diameter | 32 |
| Abrasive | 25А |
| Grain it FEPA | F60 |
| Hardness | L |
| Structure | 8 |
| Angle speed | 30 |
| Manufacturer | ZAK |
| Country | Ukraine |
150×50×32 mm 25A Grinding Wheel – Type 11 – F60 – 30 m/s – Vitrified bond – Grade L – Structure 8
Type 11 abrasive grinding wheel (flaring cup wheel) in size 150×50×32 mm.
The flaring cup shape allows face or peripheral contact and provides convenient access to cutting edges during tool sharpening.
The abrasive, grit size and structure determine the stock-removal behaviour and the resulting surface condition.
What it actually does:
FEPA grit F60 positions this wheel for semi-finish grinding with controlled stock removal.
Correct bore fit and flange compatibility are particularly important for this wheel configuration.
Abrasive 25A — white fused aluminium oxide:
A high-purity, sharp and friable grain that renews its cutting edges and helps reduce the risk of thermal damage.
- Hardened and tool steels
- High-speed and alloy steels
- Precision grinding and tool sharpening
FEPA grit size F60:
Medium-fine grain size for bonded abrasive products.
- Balanced cutting performance
- A more uniform surface than coarse grits
- Suitable preparation for a finishing pass
Vitrified bond:
- Provides strong form retention
- Can be dressed accurately
- Its porous matrix helps remove chips and heat
Limitation: Vitrified wheels are sensitive to impact and unauthorised side loading.
In practice:
If cutting action gives way to excessive rubbing, check the dressing condition, feed and coolant delivery.
Specification:
- Type: 11 (flaring cup wheel)
- Size: 150×50×32 mm
- Outside diameter D: 150 mm
- Wheel thickness T: 50 mm
- Bore diameter H: 32 mm
- Abrasive: 25A, white fused aluminium oxide
- Grit: FEPA F60
- Wheel grade: L
- Structure: 8
- Bond: vitrified
- Maximum operating speed: 30 m/s
Wheel grade L:
Medium-soft bond-holding characteristic.
- Supports regular renewal of cutting edges
- Performs well under moderate loading
- Requires monitoring of wheel wear and profile retention
Structure 8:
Open wheel structure.
- More chip clearance
- Improved coolant access to the grinding zone
- Reduced risk of wheel loading during prolonged contact
Use for:
- Tool sharpening
- Face and profile grinding on compatible equipment
- Hardened and tool steels
- High-speed and alloy steels
- Precision grinding and tool sharpening
Do not use for:
- Cemented carbide, glass and ceramics, where silicon carbide is generally more suitable
- Heavy snagging with severe impact loading
- Side loading unless specifically permitted by the wheel design
- Operation above 30 m/s
Before mounting, inspect the wheel for damage and confirm bore fit, mounting method and machine compatibility. Use the correct guard and follow the machine operating instructions.