150x40x32 64С Grinding wheel Type-11 F46 30 m/s on Ceramic bond L 8

Out of stock
SKU
316374-10013
$10.84
More Information
Bond Ceramic
Wheel type 11
D - top diameter 150
T - wheel thickness 40
H - hole diameter 32
Abrasive 64С
Grain it FEPA F46
Hardness L
Structure 8
Angle speed 30
Manufacturer ZAK
Country Ukraine

150×40×32 mm 64C Grinding Wheel – Type 11 – F46 – 30 m/s – Vitrified bond – Grade L – Structure 8

Type 11 abrasive grinding wheel (flaring cup wheel) in size 150×40×32 mm.
The flaring cup shape allows face or peripheral contact and provides convenient access to cutting edges during tool sharpening.

Consistent results require the correct combination of feed, dressing, coolant application and contact area.

What it actually does:

FEPA grit F46 positions this wheel for general roughing and semi-finishing.
Correct bore fit and flange compatibility are particularly important for this wheel configuration.

Abrasive 64C — green silicon carbide:

A very hard and friable abrasive with sharp cutting edges for cemented carbides and brittle non-metallic materials.

  • Cemented carbides
  • Technical ceramics and glass
  • Mineral materials and precision sharpening of carbide tools

FEPA grit size F46:

Medium grain size for bonded abrasive products.

  • Productive material removal
  • Suitable for establishing geometry
  • Leaves the surface ready for further finishing when tighter requirements apply

Vitrified bond:

  • Provides strong form retention
  • Can be dressed accurately
  • Its porous matrix helps remove chips and heat

Limitation: Vitrified wheels are sensitive to impact and unauthorised side loading.

In practice:

Repeatable results depend on accurate dressing, system rigidity and a consistent feed rate.

Specification:

  • Type: 11 (flaring cup wheel)
  • Size: 150×40×32 mm
  • Outside diameter D: 150 mm
  • Wheel thickness T: 40 mm
  • Bore diameter H: 32 mm
  • Abrasive: 64C, green silicon carbide
  • Grit: FEPA F46
  • Wheel grade: L
  • Structure: 8
  • Bond: vitrified
  • Maximum operating speed: 30 m/s

Wheel grade L:

Medium-soft bond-holding characteristic.

  • Supports regular renewal of cutting edges
  • Performs well under moderate loading
  • Requires monitoring of wheel wear and profile retention

Structure 8:

Open wheel structure.

  • More chip clearance
  • Improved coolant access to the grinding zone
  • Reduced risk of wheel loading during prolonged contact

Use for:

  • Tool sharpening
  • Face and profile grinding on compatible equipment
  • Cemented carbides
  • Technical ceramics and glass
  • Mineral materials and precision sharpening of carbide tools

Do not use for:

  • Carbon and alloy steels as the primary workpiece material
  • Heavy impact grinding
  • Side loading unless specifically permitted by the wheel design
  • Operation above 30 m/s

Before mounting, inspect the wheel for damage and confirm bore fit, mounting method and machine compatibility. Use the correct guard and follow the machine operating instructions.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
© Copyright - e-Store "Razvertka" Tokar tools - production and sale of tools You may not copy, reproduce, modify, publish, upload, transmit, and distribute any elements of this site, as well as their components, by any means and in any media without prior written permission.