We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
250x140x100 64С Grinding wheel Type-11 F46 30 m/s on Ceramic bond L 8
| Bond | Ceramic |
|---|---|
| Wheel type | 11 |
| D - top diameter | 250 |
| T - wheel thickness | 140 |
| H - hole diameter | 100 |
| Abrasive | 64С |
| Grain it FEPA | F46 |
| Hardness | L |
| Structure | 8 |
| Angle speed | 30 |
| Manufacturer | ZAK |
| Country | Ukraine |
250×140×100 mm 64C Grinding Wheel – Type 11 – F46 – 30 m/s – Vitrified bond – Grade L – Structure 8
Type 11 abrasive grinding wheel (flaring cup wheel) in size 250×140×100 mm.
The flaring cup shape allows face or peripheral contact and provides convenient access to cutting edges during tool sharpening.
This specification controls cutting-edge renewal, chip clearance and form retention during grinding.
What it actually does:
FEPA grit F46 positions this wheel for general roughing and semi-finishing.
Correct bore fit and flange compatibility are particularly important for this wheel configuration.
Abrasive 64C — green silicon carbide:
A very hard and friable abrasive with sharp cutting edges for cemented carbides and brittle non-metallic materials.
- Cemented carbides
- Technical ceramics and glass
- Mineral materials and precision sharpening of carbide tools
FEPA grit size F46:
Medium grain size for bonded abrasive products.
- Productive material removal
- Suitable for establishing geometry
- Leaves the surface ready for further finishing when tighter requirements apply
Vitrified bond:
- Provides strong form retention
- Can be dressed accurately
- Its porous matrix helps remove chips and heat
Limitation: Vitrified wheels are sensitive to impact and unauthorised side loading.
In practice:
Repeatable results depend on accurate dressing, system rigidity and a consistent feed rate.
Specification:
- Type: 11 (flaring cup wheel)
- Size: 250×140×100 mm
- Outside diameter D: 250 mm
- Wheel thickness T: 140 mm
- Bore diameter H: 100 mm
- Abrasive: 64C, green silicon carbide
- Grit: FEPA F46
- Wheel grade: L
- Structure: 8
- Bond: vitrified
- Maximum operating speed: 30 m/s
Wheel grade L:
Medium-soft bond-holding characteristic.
- Supports regular renewal of cutting edges
- Performs well under moderate loading
- Requires monitoring of wheel wear and profile retention
Structure 8:
Open wheel structure.
- More chip clearance
- Improved coolant access to the grinding zone
- Reduced risk of wheel loading during prolonged contact
Use for:
- Tool sharpening
- Face and profile grinding on compatible equipment
- Cemented carbides
- Technical ceramics and glass
- Mineral materials and precision sharpening of carbide tools
Do not use for:
- Carbon and alloy steels as the primary workpiece material
- Heavy impact grinding
- Side loading unless specifically permitted by the wheel design
- Operation above 30 m/s
Before mounting, inspect the wheel for damage and confirm bore fit, mounting method and machine compatibility. Use the correct guard and follow the machine operating instructions.