We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
125x50x32 14А Grinding wheel Type-11 F60 30 m/s on Bakelite bond Non-reinforced С2 5
| Bond | Bakelite |
|---|---|
| Wheel type | 11 |
| D - top diameter | 125 |
| T - wheel thickness | 50 |
| H - hole diameter | 32 |
| Abrasive | 14А |
| Grain it FEPA | F60 |
| Hardness | С2 |
| Structure | 5 |
| Angle speed | 30 |
| Manufacturer | ZAK |
| Country | Ukraine |
125×50×32 mm 14A Grinding Wheel – Type 11 – F60 – 30 m/s – Resinoid bond – Grade С2 – Structure 5
Type 11 abrasive grinding wheel (flaring cup wheel) in size 125×50×32 mm.
The flaring cup shape allows face or peripheral contact and provides convenient access to cutting edges during tool sharpening.
These parameters balance stock removal, wheel life and surface quality for the intended operation.
What it actually does:
FEPA grit F60 positions this wheel for semi-finish grinding with controlled stock removal.
Correct bore fit and flange compatibility are particularly important for this wheel configuration.
Abrasive 14A — regular aluminium oxide:
A tough aluminium oxide grain designed for productive grinding of materials with high tensile strength.
- Carbon and low-alloy steels
- Steel billets, forgings and castings
- Rough and semi-finish grinding
FEPA grit size F60:
Medium-fine grain size for bonded abrasive products.
- Balanced cutting performance
- A more uniform surface than coarse grits
- Suitable preparation for a finishing pass
Resinoid bond:
- More resilient than a vitrified bond
- Tolerates dynamic grinding loads
- Suitable for productive stock removal
Limitation: The non-reinforced construction must be used only on compatible stationary equipment.
In practice:
If cutting action gives way to excessive rubbing, check the dressing condition, feed and coolant delivery.
Specification:
- Type: 11 (flaring cup wheel)
- Size: 125×50×32 mm
- Outside diameter D: 125 mm
- Wheel thickness T: 50 mm
- Bore diameter H: 32 mm
- Abrasive: 14A, regular aluminium oxide
- Grit: FEPA F60
- Wheel grade: С2
- Structure: 5
- Bond: resinoid (Bakelite), non-reinforced
- Maximum operating speed: 30 m/s
Wheel grade С2:
Medium bond-holding characteristic.
- Balances self-sharpening and wheel life
- Stable performance with a consistent feed
- A versatile grade for steady grinding contact
Structure 5:
Medium wheel structure.
- Balanced grain and pore volume
- Stable form retention
- Predictable performance under consistent loading
Use for:
- Tool sharpening
- Face and profile grinding on compatible equipment
- Carbon and low-alloy steels
- Steel billets, forgings and castings
- Rough and semi-finish grinding
Do not use for:
- Cemented carbide and technical ceramics
- Precision grinding of hardened steel where a cooler-cutting friable grain is required
- Side loading unless specifically permitted by the wheel design
- Operation above 30 m/s
Before mounting, inspect the wheel for damage and confirm bore fit, mounting method and machine compatibility. Use the correct guard and follow the machine operating instructions.