We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
150x50x32 64С Grinding wheel Type-11 F46 30 m/s on Bakelite bond Non-reinforced СМ1 4
| Bond | Bakelite |
|---|---|
| Wheel type | 11 |
| D - top diameter | 150 |
| T - wheel thickness | 50 |
| H - hole diameter | 32 |
| Abrasive | 64С |
| Grain it FEPA | F46 |
| Hardness | СМ1 |
| Structure | 4 |
| Angle speed | 30 |
| Manufacturer | ZAK |
| Country | Ukraine |
150×50×32 mm 64C Grinding Wheel – Type 11 – F46 – 30 m/s – Resinoid bond – Grade СМ1 – Structure 4
Type 11 abrasive grinding wheel (flaring cup wheel) in size 150×50×32 mm.
The flaring cup shape allows face or peripheral contact and provides convenient access to cutting edges during tool sharpening.
The specification is intended to provide predictable cutting action and stable development of the working surface.
What it actually does:
FEPA grit F46 positions this wheel for general roughing and semi-finishing.
Correct bore fit and flange compatibility are particularly important for this wheel configuration.
Abrasive 64C — green silicon carbide:
A very hard and friable abrasive with sharp cutting edges for cemented carbides and brittle non-metallic materials.
- Cemented carbides
- Technical ceramics and glass
- Mineral materials and precision sharpening of carbide tools
FEPA grit size F46:
Medium grain size for bonded abrasive products.
- Productive material removal
- Suitable for establishing geometry
- Leaves the surface ready for further finishing when tighter requirements apply
Resinoid bond:
- More resilient than a vitrified bond
- Tolerates dynamic grinding loads
- Suitable for productive stock removal
Limitation: The non-reinforced construction must be used only on compatible stationary equipment.
In practice:
If cutting action gives way to excessive rubbing, check the dressing condition, feed and coolant delivery.
Specification:
- Type: 11 (flaring cup wheel)
- Size: 150×50×32 mm
- Outside diameter D: 150 mm
- Wheel thickness T: 50 mm
- Bore diameter H: 32 mm
- Abrasive: 64C, green silicon carbide
- Grit: FEPA F46
- Wheel grade: СМ1
- Structure: 4
- Bond: resinoid (Bakelite), non-reinforced
- Maximum operating speed: 30 m/s
Wheel grade СМ1:
Medium-soft bond-holding characteristic.
- Supports regular renewal of cutting edges
- Performs well under moderate loading
- Requires monitoring of wheel wear and profile retention
Structure 4:
Medium wheel structure.
- Balanced grain and pore volume
- Stable form retention
- Predictable performance under consistent loading
Use for:
- Tool sharpening
- Face and profile grinding on compatible equipment
- Cemented carbides
- Technical ceramics and glass
- Mineral materials and precision sharpening of carbide tools
Do not use for:
- Carbon and alloy steels as the primary workpiece material
- Heavy impact grinding
- Side loading unless specifically permitted by the wheel design
- Operation above 30 m/s
Before mounting, inspect the wheel for damage and confirm bore fit, mounting method and machine compatibility. Use the correct guard and follow the machine operating instructions.