300x20x60 14А Grinding wheel Type-1 F80 50 m/s on Bakelite bond Non-reinforced M(С1) 5

In stock
SKU
321135-1
$36.72
More Information
Bond Bakelite
Wheel type 1
D - top diameter 300
T - wheel thickness 20
H - hole diameter 60
Abrasive 14А
Grain it FEPA F80
Hardness M(С1)
Structure 5
Angle speed 50
Manufacturer ZAK
Country Ukraine

300×20×60 mm 14A Grinding Wheel – Type 1 – F80 – 50 m/s – Resinoid bond – Grade M(С1) – Structure 5

Type 1 abrasive grinding wheel (straight wheel) in size 300×20×60 mm.
A versatile geometry for peripheral grinding, sharpening, surface grinding or cylindrical grinding, subject to the machine setup.

Performance depends not only on the dimensions, but also on the abrasive type, grit size, grade and structure.

What it actually does:

FEPA grit F80 positions this wheel for finish grinding and final size correction.
Correct bore fit and flange compatibility are particularly important for this wheel configuration.

Abrasive 14A — regular aluminium oxide:

A tough aluminium oxide grain designed for productive grinding of materials with high tensile strength.

  • Carbon and low-alloy steels
  • Steel billets, forgings and castings
  • Rough and semi-finish grinding

FEPA grit size F80:

Fine grain size for bonded abrasive products.

  • Shallower grinding marks
  • Controlled surface quality
  • Requires stable feed and timely dressing

Resinoid bond:

  • More resilient than a vitrified bond
  • Tolerates dynamic grinding loads
  • Suitable for productive stock removal

Limitation: The non-reinforced construction must be used only on compatible stationary equipment.

In practice:

Repeatable results depend on accurate dressing, system rigidity and a consistent feed rate.

Specification:

  • Type: 1 (straight wheel)
  • Size: 300×20×60 mm
  • Outside diameter D: 300 mm
  • Wheel thickness T: 20 mm
  • Bore diameter H: 60 mm
  • Abrasive: 14A, regular aluminium oxide
  • Grit: FEPA F80
  • Wheel grade: M(С1)
  • Structure: 5
  • Bond: resinoid (Bakelite), non-reinforced
  • Maximum operating speed: 50 m/s

Wheel grade M(С1):

Medium bond-holding characteristic.

  • Balances self-sharpening and wheel life
  • Stable performance with a consistent feed
  • A versatile grade for steady grinding contact

Structure 5:

Medium wheel structure.

  • Balanced grain and pore volume
  • Stable form retention
  • Predictable performance under consistent loading

Use for:

  • Peripheral grinding
  • Sharpening and sizing of working surfaces
  • Carbon and low-alloy steels
  • Steel billets, forgings and castings
  • Rough and semi-finish grinding

Do not use for:

  • Cemented carbide and technical ceramics
  • Precision grinding of hardened steel where a cooler-cutting friable grain is required
  • Side loading unless specifically permitted by the wheel design
  • Operation above 50 m/s

Before mounting, inspect the wheel for damage and confirm bore fit, mounting method and machine compatibility. Use the correct guard and follow the machine operating instructions.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
© Copyright - e-Store "Razvertka" Tokar tools - production and sale of tools You may not copy, reproduce, modify, publish, upload, transmit, and distribute any elements of this site, as well as their components, by any means and in any media without prior written permission.