We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
300x50x60 14А Grinding wheel Type-1 F80 50 m/s on Bakelite bond Non-reinforced M(С1) 5
| Bond | Bakelite |
|---|---|
| Wheel type | 1 |
| D - top diameter | 300 |
| T - wheel thickness | 50 |
| H - hole diameter | 60 |
| Abrasive | 14А |
| Grain it FEPA | F80 |
| Hardness | M(С1) |
| Structure | 5 |
| Angle speed | 50 |
| Manufacturer | ZAK |
| Country | Ukraine |
300×50×60 mm 14A Grinding Wheel – Type 1 – F80 – 50 m/s – Resinoid bond – Grade M(С1) – Structure 5
Type 1 abrasive grinding wheel (straight wheel) in size 300×50×60 mm.
A versatile geometry for peripheral grinding, sharpening, surface grinding or cylindrical grinding, subject to the machine setup.
The specification is intended to provide predictable cutting action and stable development of the working surface.
What it actually does:
FEPA grit F80 positions this wheel for finish grinding and final size correction.
Correct bore fit and flange compatibility are particularly important for this wheel configuration.
Abrasive 14A — regular aluminium oxide:
A tough aluminium oxide grain designed for productive grinding of materials with high tensile strength.
- Carbon and low-alloy steels
- Steel billets, forgings and castings
- Rough and semi-finish grinding
FEPA grit size F80:
Fine grain size for bonded abrasive products.
- Shallower grinding marks
- Controlled surface quality
- Requires stable feed and timely dressing
Resinoid bond:
- More resilient than a vitrified bond
- Tolerates dynamic grinding loads
- Suitable for productive stock removal
Limitation: The non-reinforced construction must be used only on compatible stationary equipment.
In practice:
Repeatable results depend on accurate dressing, system rigidity and a consistent feed rate.
Specification:
- Type: 1 (straight wheel)
- Size: 300×50×60 mm
- Outside diameter D: 300 mm
- Wheel thickness T: 50 mm
- Bore diameter H: 60 mm
- Abrasive: 14A, regular aluminium oxide
- Grit: FEPA F80
- Wheel grade: M(С1)
- Structure: 5
- Bond: resinoid (Bakelite), non-reinforced
- Maximum operating speed: 50 m/s
Wheel grade M(С1):
Medium bond-holding characteristic.
- Balances self-sharpening and wheel life
- Stable performance with a consistent feed
- A versatile grade for steady grinding contact
Structure 5:
Medium wheel structure.
- Balanced grain and pore volume
- Stable form retention
- Predictable performance under consistent loading
Use for:
- Peripheral grinding
- Sharpening and sizing of working surfaces
- Carbon and low-alloy steels
- Steel billets, forgings and castings
- Rough and semi-finish grinding
Do not use for:
- Cemented carbide and technical ceramics
- Precision grinding of hardened steel where a cooler-cutting friable grain is required
- Side loading unless specifically permitted by the wheel design
- Operation above 50 m/s
Before mounting, inspect the wheel for damage and confirm bore fit, mounting method and machine compatibility. Use the correct guard and follow the machine operating instructions.