We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
200x20x32 25А Grinding wheel Type-12 F80 30 m/s on Ceramic bond K 7
| Bond | Ceramic |
|---|---|
| Wheel type | 12 |
| D - top diameter | 200 |
| T - wheel thickness | 20 |
| H - hole diameter | 32 |
| Abrasive | 25А |
| Grain it FEPA | F80 |
| Hardness | K |
| Structure | 7 |
| Angle speed | 30 |
| Manufacturer | ZAK |
| Country | Ukraine |
200×20×32 mm 25A Grinding Wheel – Type 12 – F80 – 30 m/s – Vitrified bond – Grade K – Structure 7
Type 12 abrasive grinding wheel (dish wheel) in size 200×20×32 mm.
The dish geometry provides access to narrow areas and profiles, making it suitable for tool sharpening and specialised profile grinding.
This specification controls cutting-edge renewal, chip clearance and form retention during grinding.
What it actually does:
FEPA grit F80 positions this wheel for finish grinding and final size correction.
Correct bore fit and flange compatibility are particularly important for this wheel configuration.
Abrasive 25A — white fused aluminium oxide:
A high-purity, sharp and friable grain that renews its cutting edges and helps reduce the risk of thermal damage.
- Hardened and tool steels
- High-speed and alloy steels
- Precision grinding and tool sharpening
FEPA grit size F80:
Fine grain size for bonded abrasive products.
- Shallower grinding marks
- Controlled surface quality
- Requires stable feed and timely dressing
Vitrified bond:
- Provides strong form retention
- Can be dressed accurately
- Its porous matrix helps remove chips and heat
Limitation: Vitrified wheels are sensitive to impact and unauthorised side loading.
In practice:
If cutting action gives way to excessive rubbing, check the dressing condition, feed and coolant delivery.
Specification:
- Type: 12 (dish wheel)
- Size: 200×20×32 mm
- Outside diameter D: 200 mm
- Wheel thickness T: 20 mm
- Bore diameter H: 32 mm
- Abrasive: 25A, white fused aluminium oxide
- Grit: FEPA F80
- Wheel grade: K
- Structure: 7
- Bond: vitrified
- Maximum operating speed: 30 m/s
Wheel grade K:
Medium-soft bond-holding characteristic.
- Supports regular renewal of cutting edges
- Performs well under moderate loading
- Requires monitoring of wheel wear and profile retention
Structure 7:
Moderately open wheel structure.
- More chip clearance
- Improved coolant access to the grinding zone
- Reduced risk of wheel loading during prolonged contact
Use for:
- Sharpening cutting tools
- Profile grinding in restricted areas
- Hardened and tool steels
- High-speed and alloy steels
- Precision grinding and tool sharpening
Do not use for:
- Cemented carbide, glass and ceramics, where silicon carbide is generally more suitable
- Heavy snagging with severe impact loading
- Side loading unless specifically permitted by the wheel design
- Operation above 30 m/s
Before mounting, inspect the wheel for damage and confirm bore fit, mounting method and machine compatibility. Use the correct guard and follow the machine operating instructions.