250x140x100 14А Grinding wheel Type-11 F46 30 m/s on Ceramic bond J 8

Out of stock
SKU
311375-10001
$83.21
More Information
Bond Ceramic
Wheel type 11
D - top diameter 250
T - wheel thickness 140
H - hole diameter 100
Abrasive 14А
Grain it FEPA F46
Hardness J
Structure 8
Angle speed 30
Manufacturer ZAK
Country Ukraine

250×140×100 mm 14A Grinding Wheel – Type 11 – F46 – 30 m/s – Vitrified bond – Grade J – Structure 8

Type 11 abrasive grinding wheel (flaring cup wheel) in size 250×140×100 mm.
The flaring cup shape allows face or peripheral contact and provides convenient access to cutting edges during tool sharpening.

Its working behaviour is defined by the combination of wheel profile, abrasive grain, grade and porosity.

What it actually does:

FEPA grit F46 positions this wheel for general roughing and semi-finishing.
Correct bore fit and flange compatibility are particularly important for this wheel configuration.

Abrasive 14A — regular aluminium oxide:

A tough aluminium oxide grain designed for productive grinding of materials with high tensile strength.

  • Carbon and low-alloy steels
  • Steel billets, forgings and castings
  • Rough and semi-finish grinding

FEPA grit size F46:

Medium grain size for bonded abrasive products.

  • Productive material removal
  • Suitable for establishing geometry
  • Leaves the surface ready for further finishing when tighter requirements apply

Vitrified bond:

  • Provides strong form retention
  • Can be dressed accurately
  • Its porous matrix helps remove chips and heat

Limitation: Vitrified wheels are sensitive to impact and unauthorised side loading.

In practice:

If cutting action gives way to excessive rubbing, check the dressing condition, feed and coolant delivery.

Specification:

  • Type: 11 (flaring cup wheel)
  • Size: 250×140×100 mm
  • Outside diameter D: 250 mm
  • Wheel thickness T: 140 mm
  • Bore diameter H: 100 mm
  • Abrasive: 14A, regular aluminium oxide
  • Grit: FEPA F46
  • Wheel grade: J
  • Structure: 8
  • Bond: vitrified
  • Maximum operating speed: 30 m/s

Wheel grade J:

Medium-soft bond-holding characteristic.

  • Supports regular renewal of cutting edges
  • Performs well under moderate loading
  • Requires monitoring of wheel wear and profile retention

Structure 8:

Open wheel structure.

  • More chip clearance
  • Improved coolant access to the grinding zone
  • Reduced risk of wheel loading during prolonged contact

Use for:

  • Tool sharpening
  • Face and profile grinding on compatible equipment
  • Carbon and low-alloy steels
  • Steel billets, forgings and castings
  • Rough and semi-finish grinding

Do not use for:

  • Cemented carbide and technical ceramics
  • Precision grinding of hardened steel where a cooler-cutting friable grain is required
  • Side loading unless specifically permitted by the wheel design
  • Operation above 30 m/s

Before mounting, inspect the wheel for damage and confirm bore fit, mounting method and machine compatibility. Use the correct guard and follow the machine operating instructions.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
© Copyright - e-Store "Razvertka" Tokar tools - production and sale of tools You may not copy, reproduce, modify, publish, upload, transmit, and distribute any elements of this site, as well as their components, by any means and in any media without prior written permission.