We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
200x20x32 64С Grinding wheel Type-12 F46 30 m/s on Ceramic bond K 8
| Bond | Ceramic |
|---|---|
| Wheel type | 12 |
| D - top diameter | 200 |
| T - wheel thickness | 20 |
| H - hole diameter | 32 |
| Abrasive | 64С |
| Grain it FEPA | F46 |
| Hardness | K |
| Structure | 8 |
| Angle speed | 30 |
| Manufacturer | ZAK |
| Country | Ukraine |
200×20×32 mm 64C Grinding Wheel – Type 12 – F46 – 30 m/s – Vitrified bond – Grade K – Structure 8
Type 12 abrasive grinding wheel (dish wheel) in size 200×20×32 mm.
The dish geometry provides access to narrow areas and profiles, making it suitable for tool sharpening and specialised profile grinding.
Consistent results require the correct combination of feed, dressing, coolant application and contact area.
What it actually does:
FEPA grit F46 positions this wheel for general roughing and semi-finishing.
Correct bore fit and flange compatibility are particularly important for this wheel configuration.
Abrasive 64C — green silicon carbide:
A very hard and friable abrasive with sharp cutting edges for cemented carbides and brittle non-metallic materials.
- Cemented carbides
- Technical ceramics and glass
- Mineral materials and precision sharpening of carbide tools
FEPA grit size F46:
Medium grain size for bonded abrasive products.
- Productive material removal
- Suitable for establishing geometry
- Leaves the surface ready for further finishing when tighter requirements apply
Vitrified bond:
- Provides strong form retention
- Can be dressed accurately
- Its porous matrix helps remove chips and heat
Limitation: Vitrified wheels are sensitive to impact and unauthorised side loading.
In practice:
If cutting action gives way to excessive rubbing, check the dressing condition, feed and coolant delivery.
Specification:
- Type: 12 (dish wheel)
- Size: 200×20×32 mm
- Outside diameter D: 200 mm
- Wheel thickness T: 20 mm
- Bore diameter H: 32 mm
- Abrasive: 64C, green silicon carbide
- Grit: FEPA F46
- Wheel grade: K
- Structure: 8
- Bond: vitrified
- Maximum operating speed: 30 m/s
Wheel grade K:
Medium-soft bond-holding characteristic.
- Supports regular renewal of cutting edges
- Performs well under moderate loading
- Requires monitoring of wheel wear and profile retention
Structure 8:
Open wheel structure.
- More chip clearance
- Improved coolant access to the grinding zone
- Reduced risk of wheel loading during prolonged contact
Use for:
- Sharpening cutting tools
- Profile grinding in restricted areas
- Cemented carbides
- Technical ceramics and glass
- Mineral materials and precision sharpening of carbide tools
Do not use for:
- Carbon and alloy steels as the primary workpiece material
- Heavy impact grinding
- Side loading unless specifically permitted by the wheel design
- Operation above 30 m/s
Before mounting, inspect the wheel for damage and confirm bore fit, mounting method and machine compatibility. Use the correct guard and follow the machine operating instructions.