We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
250x63x127 54С Grinding wheel Type-7-C F46 25 m/s on Ceramic bond M 7
| Bond | Ceramic |
|---|---|
| Wheel type | 7-C |
| D - top diameter | 250 |
| T - wheel thickness | 63 |
| H - hole diameter | 127 |
| Abrasive | 54С |
| Grain it FEPA | F46 |
| Hardness | M |
| Structure | 7 |
| Angle speed | 25 |
| Manufacturer | ZAK |
| Country | Ukraine |
250×63×127 mm 54C Grinding Wheel – Type 7-C – F46 – 25 m/s – Vitrified bond – Grade M – Structure 7
Type 7-C abrasive grinding wheel (special double-recessed wheel) in size 250×63×127 mm.
The Type 7-C profile is intended for dedicated equipment where specified recesses, mounting clearance and stable peripheral contact are required.
Performance depends not only on the dimensions, but also on the abrasive type, grit size, grade and structure.
What it actually does:
FEPA grit F46 positions this wheel for general roughing and semi-finishing.
Correct bore fit and flange compatibility are particularly important for this wheel configuration.
Abrasive 54C — black silicon carbide:
A hard, sharp abrasive for low-tensile-strength materials and hard non-metallic surfaces.
- Cast iron
- Non-ferrous metals and alloys
- Stone, glass and selected ceramic materials
FEPA grit size F46:
Medium grain size for bonded abrasive products.
- Productive material removal
- Suitable for establishing geometry
- Leaves the surface ready for further finishing when tighter requirements apply
Vitrified bond:
- Provides strong form retention
- Can be dressed accurately
- Its porous matrix helps remove chips and heat
Limitation: Vitrified wheels are sensitive to impact and unauthorised side loading.
In practice:
With a large contact area, chip clearance, coolant supply and timely opening of the wheel face become especially important.
Specification:
- Type: 7-C (special double-recessed wheel)
- Size: 250×63×127 mm
- Outside diameter D: 250 mm
- Wheel thickness T: 63 mm
- Bore diameter H: 127 mm
- Abrasive: 54C, black silicon carbide
- Grit: FEPA F46
- Wheel grade: M
- Structure: 7
- Bond: vitrified
- Maximum operating speed: 25 m/s
Wheel grade M:
Medium bond-holding characteristic.
- Balances self-sharpening and wheel life
- Stable performance with a consistent feed
- A versatile grade for steady grinding contact
Structure 7:
Moderately open wheel structure.
- More chip clearance
- Improved coolant access to the grinding zone
- Reduced risk of wheel loading during prolonged contact
Use for:
- Peripheral grinding on specialised equipment
- Operations specifically designed for the Type 7-C profile
- Cast iron
- Non-ferrous metals and alloys
- Stone, glass and selected ceramic materials
Do not use for:
- General-purpose grinding of carbon and alloy steels
- Operations with severe impact on the brittle abrasive grain
- Side loading unless specifically permitted by the wheel design
- Operation above 25 m/s
Before mounting, inspect the wheel for damage and confirm bore fit, mounting method and machine compatibility. Use the correct guard and follow the machine operating instructions.