We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
200x20x32 64С Grinding wheel Type-12 F60 30 m/s on Ceramic bond L 8
| Bond | Ceramic |
|---|---|
| Wheel type | 12 |
| D - top diameter | 200 |
| T - wheel thickness | 20 |
| H - hole diameter | 32 |
| Abrasive | 64С |
| Grain it FEPA | F60 |
| Hardness | L |
| Structure | 8 |
| Angle speed | 30 |
| Manufacturer | ZAK |
| Country | Ukraine |
200×20×32 mm 64C Grinding Wheel – Type 12 – F60 – 30 m/s – Vitrified bond – Grade L – Structure 8
Type 12 abrasive grinding wheel (dish wheel) in size 200×20×32 mm.
The dish geometry provides access to narrow areas and profiles, making it suitable for tool sharpening and specialised profile grinding.
This wheel size is intended for stationary grinding under parameters matched to the machine and workpiece material.
What it actually does:
FEPA grit F60 positions this wheel for semi-finish grinding with controlled stock removal.
Correct bore fit and flange compatibility are particularly important for this wheel configuration.
Abrasive 64C — green silicon carbide:
A very hard and friable abrasive with sharp cutting edges for cemented carbides and brittle non-metallic materials.
- Cemented carbides
- Technical ceramics and glass
- Mineral materials and precision sharpening of carbide tools
FEPA grit size F60:
Medium-fine grain size for bonded abrasive products.
- Balanced cutting performance
- A more uniform surface than coarse grits
- Suitable preparation for a finishing pass
Vitrified bond:
- Provides strong form retention
- Can be dressed accurately
- Its porous matrix helps remove chips and heat
Limitation: Vitrified wheels are sensitive to impact and unauthorised side loading.
In practice:
Set the final operating parameters for the actual workpiece material and hardness without exceeding the marked wheel speed.
Specification:
- Type: 12 (dish wheel)
- Size: 200×20×32 mm
- Outside diameter D: 200 mm
- Wheel thickness T: 20 mm
- Bore diameter H: 32 mm
- Abrasive: 64C, green silicon carbide
- Grit: FEPA F60
- Wheel grade: L
- Structure: 8
- Bond: vitrified
- Maximum operating speed: 30 m/s
Wheel grade L:
Medium-soft bond-holding characteristic.
- Supports regular renewal of cutting edges
- Performs well under moderate loading
- Requires monitoring of wheel wear and profile retention
Structure 8:
Open wheel structure.
- More chip clearance
- Improved coolant access to the grinding zone
- Reduced risk of wheel loading during prolonged contact
Use for:
- Sharpening cutting tools
- Profile grinding in restricted areas
- Cemented carbides
- Technical ceramics and glass
- Mineral materials and precision sharpening of carbide tools
Do not use for:
- Carbon and alloy steels as the primary workpiece material
- Heavy impact grinding
- Side loading unless specifically permitted by the wheel design
- Operation above 30 m/s
Before mounting, inspect the wheel for damage and confirm bore fit, mounting method and machine compatibility. Use the correct guard and follow the machine operating instructions.