500x150x60 14А Grinding wheel Type-2 F60 35 m/s on Bakelite bond Non-reinforced М3 6

Out of stock
SKU
321378-1
$268.76
More Information
Bond Bakelite
Wheel type 2
D - top diameter 500
T - wheel thickness 150
H - hole diameter 60
Abrasive 14А
Grain it FEPA F60
Hardness М3
Structure 6
Angle speed 35
Manufacturer ZAK
Country Ukraine

500×150×60 mm 14A Grinding Wheel – Type 2 – F60 – 35 m/s – Resinoid bond – Grade М3 – Structure 6

Type 2 abrasive grinding wheel (cylinder or ring wheel) in size 500×150×60 mm.
A ring-shaped wheel intended mainly for face grinding over a broad contact area on dedicated equipment.

These parameters balance stock removal, wheel life and surface quality for the intended operation.

What it actually does:

FEPA grit F60 positions this wheel for semi-finish grinding with controlled stock removal.
Correct bore fit and flange compatibility are particularly important for this wheel configuration.

Abrasive 14A — regular aluminium oxide:

A tough aluminium oxide grain designed for productive grinding of materials with high tensile strength.

  • Carbon and low-alloy steels
  • Steel billets, forgings and castings
  • Rough and semi-finish grinding

FEPA grit size F60:

Medium-fine grain size for bonded abrasive products.

  • Balanced cutting performance
  • A more uniform surface than coarse grits
  • Suitable preparation for a finishing pass

Resinoid bond:

  • More resilient than a vitrified bond
  • Tolerates dynamic grinding loads
  • Suitable for productive stock removal

Limitation: The non-reinforced construction must be used only on compatible stationary equipment.

In practice:

Set the final operating parameters for the actual workpiece material and hardness without exceeding the marked wheel speed.

Specification:

  • Type: 2 (cylinder or ring wheel)
  • Size: 500×150×60 mm
  • Outside diameter D: 500 mm
  • Wheel thickness T: 150 mm
  • Bore diameter H: 60 mm
  • Abrasive: 14A, regular aluminium oxide
  • Grit: FEPA F60
  • Wheel grade: М3
  • Structure: 6
  • Bond: resinoid (Bakelite), non-reinforced
  • Maximum operating speed: 35 m/s

Wheel grade М3:

Soft bond-holding characteristic.

  • Releases worn abrasive grains relatively quickly
  • Promotes cooler cutting on hard workpiece materials
  • Wears faster than harder wheel grades

Structure 6:

Medium wheel structure.

  • Balanced grain and pore volume
  • Stable form retention
  • Predictable performance under consistent loading

Use for:

  • Face grinding
  • Surface grinding on compatible ring-wheel machines
  • Carbon and low-alloy steels
  • Steel billets, forgings and castings
  • Rough and semi-finish grinding

Do not use for:

  • Cemented carbide and technical ceramics
  • Precision grinding of hardened steel where a cooler-cutting friable grain is required
  • Side loading unless specifically permitted by the wheel design
  • Operation above 35 m/s

Before mounting, inspect the wheel for damage and confirm bore fit, mounting method and machine compatibility. Use the correct guard and follow the machine operating instructions.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
© Copyright - e-Store "Razvertka" Tokar tools - production and sale of tools You may not copy, reproduce, modify, publish, upload, transmit, and distribute any elements of this site, as well as their components, by any means and in any media without prior written permission.