150x16x32 14А Grinding wheel Type-12 F60 30 m/s on Ceramic bond K 7

Out of stock
SKU
311381-10002
$6.23
More Information
Bond Ceramic
Wheel type 12
D - top diameter 150
T - wheel thickness 16
H - hole diameter 32
Abrasive 14А
Grain it FEPA F60
Hardness K
Structure 7
Angle speed 30
Manufacturer ZAK
Country Ukraine

150×16×32 mm 14A Grinding Wheel – Type 12 – F60 – 30 m/s – Vitrified bond – Grade K – Structure 7

Type 12 abrasive grinding wheel (dish wheel) in size 150×16×32 mm.
The dish geometry provides access to narrow areas and profiles, making it suitable for tool sharpening and specialised profile grinding.

Performance depends not only on the dimensions, but also on the abrasive type, grit size, grade and structure.

What it actually does:

FEPA grit F60 positions this wheel for semi-finish grinding with controlled stock removal.
Correct bore fit and flange compatibility are particularly important for this wheel configuration.

Abrasive 14A — regular aluminium oxide:

A tough aluminium oxide grain designed for productive grinding of materials with high tensile strength.

  • Carbon and low-alloy steels
  • Steel billets, forgings and castings
  • Rough and semi-finish grinding

FEPA grit size F60:

Medium-fine grain size for bonded abrasive products.

  • Balanced cutting performance
  • A more uniform surface than coarse grits
  • Suitable preparation for a finishing pass

Vitrified bond:

  • Provides strong form retention
  • Can be dressed accurately
  • Its porous matrix helps remove chips and heat

Limitation: Vitrified wheels are sensitive to impact and unauthorised side loading.

In practice:

Set the final operating parameters for the actual workpiece material and hardness without exceeding the marked wheel speed.

Specification:

  • Type: 12 (dish wheel)
  • Size: 150×16×32 mm
  • Outside diameter D: 150 mm
  • Wheel thickness T: 16 mm
  • Bore diameter H: 32 mm
  • Abrasive: 14A, regular aluminium oxide
  • Grit: FEPA F60
  • Wheel grade: K
  • Structure: 7
  • Bond: vitrified
  • Maximum operating speed: 30 m/s

Wheel grade K:

Medium-soft bond-holding characteristic.

  • Supports regular renewal of cutting edges
  • Performs well under moderate loading
  • Requires monitoring of wheel wear and profile retention

Structure 7:

Moderately open wheel structure.

  • More chip clearance
  • Improved coolant access to the grinding zone
  • Reduced risk of wheel loading during prolonged contact

Use for:

  • Sharpening cutting tools
  • Profile grinding in restricted areas
  • Carbon and low-alloy steels
  • Steel billets, forgings and castings
  • Rough and semi-finish grinding

Do not use for:

  • Cemented carbide and technical ceramics
  • Precision grinding of hardened steel where a cooler-cutting friable grain is required
  • Side loading unless specifically permitted by the wheel design
  • Operation above 30 m/s

Before mounting, inspect the wheel for damage and confirm bore fit, mounting method and machine compatibility. Use the correct guard and follow the machine operating instructions.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
© Copyright - e-Store "Razvertka" Tokar tools - production and sale of tools You may not copy, reproduce, modify, publish, upload, transmit, and distribute any elements of this site, as well as their components, by any means and in any media without prior written permission.