We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
175x16x32 25А Grinding wheel Type-12 F46 30 m/s on Ceramic bond K 6
| Bond | Ceramic |
|---|---|
| Wheel type | 12 |
| D - top diameter | 175 |
| T - wheel thickness | 16 |
| H - hole diameter | 32 |
| Abrasive | 25А |
| Grain it FEPA | F46 |
| Hardness | K |
| Structure | 6 |
| Angle speed | 30 |
| Manufacturer | ZAK |
| Country | Ukraine |
175×16×32 mm 25A Grinding Wheel – Type 12 – F46 – 30 m/s – Vitrified bond – Grade K – Structure 6
Type 12 abrasive grinding wheel (dish wheel) in size 175×16×32 mm.
The dish geometry provides access to narrow areas and profiles, making it suitable for tool sharpening and specialised profile grinding.
Its working behaviour is defined by the combination of wheel profile, abrasive grain, grade and porosity.
What it actually does:
FEPA grit F46 positions this wheel for general roughing and semi-finishing.
Correct bore fit and flange compatibility are particularly important for this wheel configuration.
Abrasive 25A — white fused aluminium oxide:
A high-purity, sharp and friable grain that renews its cutting edges and helps reduce the risk of thermal damage.
- Hardened and tool steels
- High-speed and alloy steels
- Precision grinding and tool sharpening
FEPA grit size F46:
Medium grain size for bonded abrasive products.
- Productive material removal
- Suitable for establishing geometry
- Leaves the surface ready for further finishing when tighter requirements apply
Vitrified bond:
- Provides strong form retention
- Can be dressed accurately
- Its porous matrix helps remove chips and heat
Limitation: Vitrified wheels are sensitive to impact and unauthorised side loading.
In practice:
Set the final operating parameters for the actual workpiece material and hardness without exceeding the marked wheel speed.
Specification:
- Type: 12 (dish wheel)
- Size: 175×16×32 mm
- Outside diameter D: 175 mm
- Wheel thickness T: 16 mm
- Bore diameter H: 32 mm
- Abrasive: 25A, white fused aluminium oxide
- Grit: FEPA F46
- Wheel grade: K
- Structure: 6
- Bond: vitrified
- Maximum operating speed: 30 m/s
Wheel grade K:
Medium-soft bond-holding characteristic.
- Supports regular renewal of cutting edges
- Performs well under moderate loading
- Requires monitoring of wheel wear and profile retention
Structure 6:
Medium wheel structure.
- Balanced grain and pore volume
- Stable form retention
- Predictable performance under consistent loading
Use for:
- Sharpening cutting tools
- Profile grinding in restricted areas
- Hardened and tool steels
- High-speed and alloy steels
- Precision grinding and tool sharpening
Do not use for:
- Cemented carbide, glass and ceramics, where silicon carbide is generally more suitable
- Heavy snagging with severe impact loading
- Side loading unless specifically permitted by the wheel design
- Operation above 30 m/s
Before mounting, inspect the wheel for damage and confirm bore fit, mounting method and machine compatibility. Use the correct guard and follow the machine operating instructions.