We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
132x50x50 54С Grinding wheel Type-1 F54 35 m/s on Bakelite bond Non-reinforced K(СМ1) 5
| Bond | Bakelite |
|---|---|
| Wheel type | 1 |
| D - top diameter | 132 |
| T - wheel thickness | 50 |
| H - hole diameter | 50 |
| Abrasive | 54С |
| Grain it FEPA | F54 |
| Hardness | K(СМ1) |
| Structure | 5 |
| Angle speed | 35 |
| Manufacturer | ZAK |
| Country | Ukraine |
132×50×50 mm 54C Grinding Wheel – Type 1 – F54 – 35 m/s – Resinoid bond – Grade K(СМ1) – Structure 5
Type 1 abrasive grinding wheel (straight wheel) in size 132×50×50 mm.
A versatile geometry for peripheral grinding, sharpening, surface grinding or cylindrical grinding, subject to the machine setup.
Select this wheel with reference to the workpiece material, contact area and required grinding stage.
What it actually does:
FEPA grit F54 positions this wheel for semi-finish grinding with controlled stock removal.
For this specification, maintain a clean, open and correctly dressed wheel surface.
Abrasive 54C — black silicon carbide:
A hard, sharp abrasive for low-tensile-strength materials and hard non-metallic surfaces.
- Cast iron
- Non-ferrous metals and alloys
- Stone, glass and selected ceramic materials
FEPA grit size F54:
Medium-fine grain size for bonded abrasive products.
- Balanced cutting performance
- A more uniform surface than coarse grits
- Suitable preparation for a finishing pass
Resinoid bond:
- More resilient than a vitrified bond
- Tolerates dynamic grinding loads
- Suitable for productive stock removal
Limitation: The non-reinforced construction must be used only on compatible stationary equipment.
In practice:
After mounting, verify free rotation, the safety guard and the no-load test required by the machine instructions.
Specification:
- Type: 1 (straight wheel)
- Size: 132×50×50 mm
- Outside diameter D: 132 mm
- Wheel thickness T: 50 mm
- Bore diameter H: 50 mm
- Abrasive: 54C, black silicon carbide
- Grit: FEPA F54
- Wheel grade: K(СМ1)
- Structure: 5
- Bond: resinoid (Bakelite), non-reinforced
- Maximum operating speed: 35 m/s
Wheel grade K(СМ1):
Medium-soft bond-holding characteristic.
- Supports regular renewal of cutting edges
- Performs well under moderate loading
- Requires monitoring of wheel wear and profile retention
Structure 5:
Medium wheel structure.
- Balanced grain and pore volume
- Stable form retention
- Predictable performance under consistent loading
Use for:
- Peripheral grinding
- Sharpening and sizing of working surfaces
- Cast iron
- Non-ferrous metals and alloys
- Stone, glass and selected ceramic materials
Do not use for:
- General-purpose grinding of carbon and alloy steels
- Operations with severe impact on the brittle abrasive grain
- Side loading unless specifically permitted by the wheel design
- Operation above 35 m/s
Before mounting, inspect the wheel for damage and confirm bore fit, mounting method and machine compatibility. Use the correct guard and follow the machine operating instructions.