500x12x203 14А Grinding wheel Type-1 F22 80 m/s on Bakelite bond Non-reinforced R

In stock
SKU
321246-10001
$219.28
More Information
Bond Bakelite
Wheel type 1
D - top diameter 500
T - wheel thickness 12
H - hole diameter 203
Abrasive 14А
Grain it FEPA F22
Hardness R
Angle speed 80
Manufacturer ZAK
Country Ukraine

500×12×203 mm 14A Grinding Wheel – Type 1 – F22 – 80 m/s – Resinoid bond – Grade R

Type 1 abrasive grinding wheel (straight wheel) in size 500×12×203 mm.
A versatile geometry for peripheral grinding, sharpening, surface grinding or cylindrical grinding, subject to the machine setup.

This specification is designed for controlled grinding based on the abrasive type, grit size, wheel grade and structure.

What it actually does:

FEPA grit F22 positions this wheel for heavy rough grinding with a high stock-removal rate.
For this specification, maintain a clean, open and correctly dressed wheel surface.

Abrasive 14A — regular aluminium oxide:

A tough aluminium oxide grain designed for productive grinding of materials with high tensile strength.

  • Carbon and low-alloy steels
  • Steel billets, forgings and castings
  • Rough and semi-finish grinding

FEPA grit size F22:

Very coarse to coarse grain size for bonded abrasive products.

  • High stock-removal capacity
  • A pronounced abrasive scratch pattern
  • Usually requires an allowance for subsequent finishing

Resinoid bond:

  • More resilient than a vitrified bond
  • Tolerates dynamic grinding loads
  • Suitable for productive stock removal

Limitation: The non-reinforced construction must be used only on compatible stationary equipment.

In practice:

After mounting, verify free rotation, the safety guard and the no-load test required by the machine instructions.

Specification:

  • Type: 1 (straight wheel)
  • Size: 500×12×203 mm
  • Outside diameter D: 500 mm
  • Wheel thickness T: 12 mm
  • Bore diameter H: 203 mm
  • Abrasive: 14A, regular aluminium oxide
  • Grit: FEPA F22
  • Wheel grade: R
  • Bond: resinoid (Bakelite), non-reinforced
  • Maximum operating speed: 80 m/s

Wheel grade R:

Hard bond-holding characteristic.

  • Holds abrasive grains firmly in the bond
  • Provides strong resistance to profile wear
  • Requires the correct grinding load to avoid glazing and overheating

Structure :

Dense wheel structure.

  • High abrasive-grain concentration
  • Good retention of the working form
  • Requires careful control of loading and heat generation

Use for:

  • Peripheral grinding
  • Sharpening and sizing of working surfaces
  • Carbon and low-alloy steels
  • Steel billets, forgings and castings
  • Rough and semi-finish grinding

Do not use for:

  • Cemented carbide and technical ceramics
  • Precision grinding of hardened steel where a cooler-cutting friable grain is required
  • Side loading unless specifically permitted by the wheel design
  • Operation above 80 m/s

Before mounting, inspect the wheel for damage and confirm bore fit, mounting method and machine compatibility. Use the correct guard and follow the machine operating instructions.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
© Copyright - e-Store "Razvertka" Tokar tools - production and sale of tools You may not copy, reproduce, modify, publish, upload, transmit, and distribute any elements of this site, as well as their components, by any means and in any media without prior written permission.