600x80x305 54С Grinding wheel Type-1 F46 35 m/s on Bakelite bond Non-reinforced СМ1

In stock
SKU
325352-1
$443.84
More Information
Bond Bakelite
Wheel type 1
D - top diameter 600
T - wheel thickness 80
H - hole diameter 305
Abrasive 54С
Grain it FEPA F46
Hardness СМ1
Angle speed 35
Manufacturer ZAK
Country Ukraine

600×80×305 mm 54C Grinding Wheel – Type 1 – F46 – 35 m/s – Resinoid bond – Grade СМ1

Type 1 abrasive grinding wheel (straight wheel) in size 600×80×305 mm.
A versatile geometry for peripheral grinding, sharpening, surface grinding or cylindrical grinding, subject to the machine setup.

This specification is designed for controlled grinding based on the abrasive type, grit size, wheel grade and structure.

What it actually does:

FEPA grit F46 positions this wheel for general roughing and semi-finishing.
For this specification, maintain a clean, open and correctly dressed wheel surface.

Abrasive 54C — black silicon carbide:

A hard, sharp abrasive for low-tensile-strength materials and hard non-metallic surfaces.

  • Cast iron
  • Non-ferrous metals and alloys
  • Stone, glass and selected ceramic materials

FEPA grit size F46:

Medium grain size for bonded abrasive products.

  • Productive material removal
  • Suitable for establishing geometry
  • Leaves the surface ready for further finishing when tighter requirements apply

Resinoid bond:

  • More resilient than a vitrified bond
  • Tolerates dynamic grinding loads
  • Suitable for productive stock removal

Limitation: The non-reinforced construction must be used only on compatible stationary equipment.

In practice:

Dressing should restore geometry and cutting ability without unnecessarily weakening the working surface.

Specification:

  • Type: 1 (straight wheel)
  • Size: 600×80×305 mm
  • Outside diameter D: 600 mm
  • Wheel thickness T: 80 mm
  • Bore diameter H: 305 mm
  • Abrasive: 54C, black silicon carbide
  • Grit: FEPA F46
  • Wheel grade: СМ1
  • Bond: resinoid (Bakelite), non-reinforced
  • Maximum operating speed: 35 m/s

Wheel grade СМ1:

Medium-soft bond-holding characteristic.

  • Supports regular renewal of cutting edges
  • Performs well under moderate loading
  • Requires monitoring of wheel wear and profile retention

Structure :

Dense wheel structure.

  • High abrasive-grain concentration
  • Good retention of the working form
  • Requires careful control of loading and heat generation

Use for:

  • Peripheral grinding
  • Sharpening and sizing of working surfaces
  • Cast iron
  • Non-ferrous metals and alloys
  • Stone, glass and selected ceramic materials

Do not use for:

  • General-purpose grinding of carbon and alloy steels
  • Operations with severe impact on the brittle abrasive grain
  • Side loading unless specifically permitted by the wheel design
  • Operation above 35 m/s

Before mounting, inspect the wheel for damage and confirm bore fit, mounting method and machine compatibility. Use the correct guard and follow the machine operating instructions.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
© Copyright - e-Store "Razvertka" Tokar tools - production and sale of tools You may not copy, reproduce, modify, publish, upload, transmit, and distribute any elements of this site, as well as their components, by any means and in any media without prior written permission.