We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
500x50x203 64С Grinding wheel Type-1 F46 35 m/s on Ceramic bond I 6
| Bond | Ceramic |
|---|---|
| Wheel type | 1 |
| D - top diameter | 500 |
| T - wheel thickness | 50 |
| H - hole diameter | 203 |
| Abrasive | 64С |
| Grain it FEPA | F46 |
| Hardness | I |
| Structure | 6 |
| Angle speed | 35 |
| Manufacturer | ZAK |
| Country | Ukraine |
500×50×203 mm 64C Grinding Wheel – Type 1 – F46 – 35 m/s – Vitrified bond – Grade I – Structure 6
Type 1 abrasive grinding wheel (straight wheel) in size 500×50×203 mm.
A versatile geometry for peripheral grinding, sharpening, surface grinding or cylindrical grinding, subject to the machine setup.
Performance depends not only on the dimensions, but also on the abrasive type, grit size, grade and structure.
What it actually does:
FEPA grit F46 positions this wheel for general roughing and semi-finishing.
The main objective of this configuration is to balance stock removal with reliable profile retention.
Abrasive 64C — green silicon carbide:
A very hard and friable abrasive with sharp cutting edges for cemented carbides and brittle non-metallic materials.
- Cemented carbides
- Technical ceramics and glass
- Mineral materials and precision sharpening of carbide tools
FEPA grit size F46:
Medium grain size for bonded abrasive products.
- Productive material removal
- Suitable for establishing geometry
- Leaves the surface ready for further finishing when tighter requirements apply
Vitrified bond:
- Provides strong form retention
- Can be dressed accurately
- Its porous matrix helps remove chips and heat
Limitation: Vitrified wheels are sensitive to impact and unauthorised side loading.
In practice:
If cutting action gives way to excessive rubbing, check the dressing condition, feed and coolant delivery.
Specification:
- Type: 1 (straight wheel)
- Size: 500×50×203 mm
- Outside diameter D: 500 mm
- Wheel thickness T: 50 mm
- Bore diameter H: 203 mm
- Abrasive: 64C, green silicon carbide
- Grit: FEPA F46
- Wheel grade: I
- Structure: 6
- Bond: vitrified
- Maximum operating speed: 35 m/s
Wheel grade I:
Medium-soft bond-holding characteristic.
- Supports regular renewal of cutting edges
- Performs well under moderate loading
- Requires monitoring of wheel wear and profile retention
Structure 6:
Medium wheel structure.
- Balanced grain and pore volume
- Stable form retention
- Predictable performance under consistent loading
Use for:
- Peripheral grinding
- Sharpening and sizing of working surfaces
- Cemented carbides
- Technical ceramics and glass
- Mineral materials and precision sharpening of carbide tools
Do not use for:
- Carbon and alloy steels as the primary workpiece material
- Heavy impact grinding
- Side loading unless specifically permitted by the wheel design
- Operation above 35 m/s
Before mounting, inspect the wheel for damage and confirm bore fit, mounting method and machine compatibility. Use the correct guard and follow the machine operating instructions.