We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
300x10x127 14А Grinding wheel Type-1 F120 60 m/s on Ceramic bond СМ1 7
| Bond | Ceramic |
|---|---|
| Wheel type | 1 |
| D - top diameter | 300 |
| T - wheel thickness | 10 |
| H - hole diameter | 127 |
| Abrasive | 14А |
| Grain it FEPA | F120 |
| Hardness | СМ1 |
| Structure | 7 |
| Angle speed | 60 |
| Manufacturer | ZAK |
| Country | Ukraine |
300×10×127 mm 14A Grinding Wheel – Type 1 – F120 – 60 m/s – Vitrified bond – Grade СМ1 – Structure 7
Type 1 abrasive grinding wheel (straight wheel) in size 300×10×127 mm.
A versatile geometry for peripheral grinding, sharpening, surface grinding or cylindrical grinding, subject to the machine setup.
Select this wheel with reference to the workpiece material, contact area and required grinding stage.
What it actually does:
FEPA grit F120 positions this wheel for fine finishing and precision sizing.
The main objective of this configuration is to balance stock removal with reliable profile retention.
Abrasive 14A — regular aluminium oxide:
A tough aluminium oxide grain designed for productive grinding of materials with high tensile strength.
- Carbon and low-alloy steels
- Steel billets, forgings and castings
- Rough and semi-finish grinding
FEPA grit size F120:
Very fine grain size for bonded abrasive products.
- Low stock removal per pass
- High surface uniformity
- Sensitive to overloading and wheel loading
Vitrified bond:
- Provides strong form retention
- Can be dressed accurately
- Its porous matrix helps remove chips and heat
Limitation: Vitrified wheels are sensitive to impact and unauthorised side loading.
In practice:
If cutting action gives way to excessive rubbing, check the dressing condition, feed and coolant delivery.
Specification:
- Type: 1 (straight wheel)
- Size: 300×10×127 mm
- Outside diameter D: 300 mm
- Wheel thickness T: 10 mm
- Bore diameter H: 127 mm
- Abrasive: 14A, regular aluminium oxide
- Grit: FEPA F120
- Wheel grade: СМ1
- Structure: 7
- Bond: vitrified
- Maximum operating speed: 60 m/s
Wheel grade СМ1:
Medium-soft bond-holding characteristic.
- Supports regular renewal of cutting edges
- Performs well under moderate loading
- Requires monitoring of wheel wear and profile retention
Structure 7:
Moderately open wheel structure.
- More chip clearance
- Improved coolant access to the grinding zone
- Reduced risk of wheel loading during prolonged contact
Use for:
- Peripheral grinding
- Sharpening and sizing of working surfaces
- Carbon and low-alloy steels
- Steel billets, forgings and castings
- Rough and semi-finish grinding
Do not use for:
- Cemented carbide and technical ceramics
- Precision grinding of hardened steel where a cooler-cutting friable grain is required
- Side loading unless specifically permitted by the wheel design
- Operation above 60 m/s
Before mounting, inspect the wheel for damage and confirm bore fit, mounting method and machine compatibility. Use the correct guard and follow the machine operating instructions.