125x32x32 54С Grinding wheel Type-1 F22 30 m/s on Ceramic bond Т2 3

In stock
SKU
315229-2
$16.67
More Information
Bond Ceramic
Wheel type 1
D - top diameter 125
T - wheel thickness 32
H - hole diameter 32
Abrasive 54С
Grain it FEPA F22
Hardness Т2
Structure 3
Angle speed 30
Manufacturer ZAK
Country Ukraine

125×32×32 mm 54C Grinding Wheel – Type 1 – F22 – 30 m/s – Vitrified bond – Grade Т2 – Structure 3

Type 1 abrasive grinding wheel (straight wheel) in size 125×32×32 mm.
A versatile geometry for peripheral grinding, sharpening, surface grinding or cylindrical grinding, subject to the machine setup.

This wheel size is intended for stationary grinding under parameters matched to the machine and workpiece material.

What it actually does:

FEPA grit F22 positions this wheel for heavy rough grinding with a high stock-removal rate.
The main objective of this configuration is to balance stock removal with reliable profile retention.

Abrasive 54C — black silicon carbide:

A hard, sharp abrasive for low-tensile-strength materials and hard non-metallic surfaces.

  • Cast iron
  • Non-ferrous metals and alloys
  • Stone, glass and selected ceramic materials

FEPA grit size F22:

Very coarse to coarse grain size for bonded abrasive products.

  • High stock-removal capacity
  • A pronounced abrasive scratch pattern
  • Usually requires an allowance for subsequent finishing

Vitrified bond:

  • Provides strong form retention
  • Can be dressed accurately
  • Its porous matrix helps remove chips and heat

Limitation: Vitrified wheels are sensitive to impact and unauthorised side loading.

In practice:

If cutting action gives way to excessive rubbing, check the dressing condition, feed and coolant delivery.

Specification:

  • Type: 1 (straight wheel)
  • Size: 125×32×32 mm
  • Outside diameter D: 125 mm
  • Wheel thickness T: 32 mm
  • Bore diameter H: 32 mm
  • Abrasive: 54C, black silicon carbide
  • Grit: FEPA F22
  • Wheel grade: Т2
  • Structure: 3
  • Bond: vitrified
  • Maximum operating speed: 30 m/s

Wheel grade Т2:

Hard bond-holding characteristic.

  • Holds abrasive grains firmly in the bond
  • Provides strong resistance to profile wear
  • Requires the correct grinding load to avoid glazing and overheating

Structure 3:

Dense wheel structure.

  • High abrasive-grain concentration
  • Good retention of the working form
  • Requires careful control of loading and heat generation

Use for:

  • Peripheral grinding
  • Sharpening and sizing of working surfaces
  • Cast iron
  • Non-ferrous metals and alloys
  • Stone, glass and selected ceramic materials

Do not use for:

  • General-purpose grinding of carbon and alloy steels
  • Operations with severe impact on the brittle abrasive grain
  • Side loading unless specifically permitted by the wheel design
  • Operation above 30 m/s

Before mounting, inspect the wheel for damage and confirm bore fit, mounting method and machine compatibility. Use the correct guard and follow the machine operating instructions.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
© Copyright - e-Store "Razvertka" Tokar tools - production and sale of tools You may not copy, reproduce, modify, publish, upload, transmit, and distribute any elements of this site, as well as their components, by any means and in any media without prior written permission.