450x63x203 64С Grinding wheel Type-1 F46 35 m/s on Ceramic bond H 7

In stock
SKU
316345-10002
$321.44
More Information
Bond Ceramic
Wheel type 1
D - top diameter 450
T - wheel thickness 63
H - hole diameter 203
Abrasive 64С
Grain it FEPA F46
Hardness H
Structure 7
Angle speed 35
Manufacturer ZAK
Country Ukraine

450×63×203 mm 64C Grinding Wheel – Type 1 – F46 – 35 m/s – Vitrified bond – Grade H – Structure 7

Type 1 abrasive grinding wheel (straight wheel) in size 450×63×203 mm.
A versatile geometry for peripheral grinding, sharpening, surface grinding or cylindrical grinding, subject to the machine setup.

These parameters balance stock removal, wheel life and surface quality for the intended operation.

What it actually does:

FEPA grit F46 positions this wheel for general roughing and semi-finishing.
The main objective of this configuration is to balance stock removal with reliable profile retention.

Abrasive 64C — green silicon carbide:

A very hard and friable abrasive with sharp cutting edges for cemented carbides and brittle non-metallic materials.

  • Cemented carbides
  • Technical ceramics and glass
  • Mineral materials and precision sharpening of carbide tools

FEPA grit size F46:

Medium grain size for bonded abrasive products.

  • Productive material removal
  • Suitable for establishing geometry
  • Leaves the surface ready for further finishing when tighter requirements apply

Vitrified bond:

  • Provides strong form retention
  • Can be dressed accurately
  • Its porous matrix helps remove chips and heat

Limitation: Vitrified wheels are sensitive to impact and unauthorised side loading.

In practice:

If cutting action gives way to excessive rubbing, check the dressing condition, feed and coolant delivery.

Specification:

  • Type: 1 (straight wheel)
  • Size: 450×63×203 mm
  • Outside diameter D: 450 mm
  • Wheel thickness T: 63 mm
  • Bore diameter H: 203 mm
  • Abrasive: 64C, green silicon carbide
  • Grit: FEPA F46
  • Wheel grade: H
  • Structure: 7
  • Bond: vitrified
  • Maximum operating speed: 35 m/s

Wheel grade H:

Soft bond-holding characteristic.

  • Releases worn abrasive grains relatively quickly
  • Promotes cooler cutting on hard workpiece materials
  • Wears faster than harder wheel grades

Structure 7:

Moderately open wheel structure.

  • More chip clearance
  • Improved coolant access to the grinding zone
  • Reduced risk of wheel loading during prolonged contact

Use for:

  • Peripheral grinding
  • Sharpening and sizing of working surfaces
  • Cemented carbides
  • Technical ceramics and glass
  • Mineral materials and precision sharpening of carbide tools

Do not use for:

  • Carbon and alloy steels as the primary workpiece material
  • Heavy impact grinding
  • Side loading unless specifically permitted by the wheel design
  • Operation above 35 m/s

Before mounting, inspect the wheel for damage and confirm bore fit, mounting method and machine compatibility. Use the correct guard and follow the machine operating instructions.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
© Copyright - e-Store "Razvertka" Tokar tools - production and sale of tools You may not copy, reproduce, modify, publish, upload, transmit, and distribute any elements of this site, as well as their components, by any means and in any media without prior written permission.