We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
350x100x127 64С Grinding wheel Type-1 F80 35 m/s on Ceramic bond M 7
| Bond | Ceramic |
|---|---|
| Wheel type | 1 |
| D - top diameter | 350 |
| T - wheel thickness | 100 |
| H - hole diameter | 127 |
| Abrasive | 64С |
| Grain it FEPA | F80 |
| Hardness | M |
| Structure | 7 |
| Angle speed | 35 |
| Manufacturer | ZAK |
| Country | Ukraine |
350×100×127 mm 64C Grinding Wheel – Type 1 – F80 – 35 m/s – Vitrified bond – Grade M – Structure 7
Type 1 abrasive grinding wheel (straight wheel) in size 350×100×127 mm.
A versatile geometry for peripheral grinding, sharpening, surface grinding or cylindrical grinding, subject to the machine setup.
This specification is designed for controlled grinding based on the abrasive type, grit size, wheel grade and structure.
What it actually does:
FEPA grit F80 positions this wheel for finish grinding and final size correction.
The main objective of this configuration is to balance stock removal with reliable profile retention.
Abrasive 64C — green silicon carbide:
A very hard and friable abrasive with sharp cutting edges for cemented carbides and brittle non-metallic materials.
- Cemented carbides
- Technical ceramics and glass
- Mineral materials and precision sharpening of carbide tools
FEPA grit size F80:
Fine grain size for bonded abrasive products.
- Shallower grinding marks
- Controlled surface quality
- Requires stable feed and timely dressing
Vitrified bond:
- Provides strong form retention
- Can be dressed accurately
- Its porous matrix helps remove chips and heat
Limitation: Vitrified wheels are sensitive to impact and unauthorised side loading.
In practice:
Set the final operating parameters for the actual workpiece material and hardness without exceeding the marked wheel speed.
Specification:
- Type: 1 (straight wheel)
- Size: 350×100×127 mm
- Outside diameter D: 350 mm
- Wheel thickness T: 100 mm
- Bore diameter H: 127 mm
- Abrasive: 64C, green silicon carbide
- Grit: FEPA F80
- Wheel grade: M
- Structure: 7
- Bond: vitrified
- Maximum operating speed: 35 m/s
Wheel grade M:
Medium bond-holding characteristic.
- Balances self-sharpening and wheel life
- Stable performance with a consistent feed
- A versatile grade for steady grinding contact
Structure 7:
Moderately open wheel structure.
- More chip clearance
- Improved coolant access to the grinding zone
- Reduced risk of wheel loading during prolonged contact
Use for:
- Peripheral grinding
- Sharpening and sizing of working surfaces
- Cemented carbides
- Technical ceramics and glass
- Mineral materials and precision sharpening of carbide tools
Do not use for:
- Carbon and alloy steels as the primary workpiece material
- Heavy impact grinding
- Side loading unless specifically permitted by the wheel design
- Operation above 35 m/s
Before mounting, inspect the wheel for damage and confirm bore fit, mounting method and machine compatibility. Use the correct guard and follow the machine operating instructions.