200x20x32 14А Grinding wheel Type-1 F150 35 m/s on Ceramic bond J 7

In stock
SKU
311427-10023
$15.17
More Information
Bond Ceramic
Wheel type 1
D - top diameter 200
T - wheel thickness 20
H - hole diameter 32
Abrasive 14А
Grain it FEPA F150
Hardness J
Structure 7
Angle speed 35
Manufacturer ZAK
Country Ukraine

200×20×32 mm 14A Grinding Wheel – Type 1 – F150 – 35 m/s – Vitrified bond – Grade J – Structure 7

Type 1 abrasive grinding wheel (straight wheel) in size 200×20×32 mm.
A versatile geometry for peripheral grinding, sharpening, surface grinding or cylindrical grinding, subject to the machine setup.

Its working behaviour is defined by the combination of wheel profile, abrasive grain, grade and porosity.

What it actually does:

FEPA grit F150 positions this wheel for fine finishing and precision sizing.
The main objective of this configuration is to balance stock removal with reliable profile retention.

Abrasive 14A — regular aluminium oxide:

A tough aluminium oxide grain designed for productive grinding of materials with high tensile strength.

  • Carbon and low-alloy steels
  • Steel billets, forgings and castings
  • Rough and semi-finish grinding

FEPA grit size F150:

Very fine grain size for bonded abrasive products.

  • Low stock removal per pass
  • High surface uniformity
  • Sensitive to overloading and wheel loading

Vitrified bond:

  • Provides strong form retention
  • Can be dressed accurately
  • Its porous matrix helps remove chips and heat

Limitation: Vitrified wheels are sensitive to impact and unauthorised side loading.

In practice:

Set the final operating parameters for the actual workpiece material and hardness without exceeding the marked wheel speed.

Specification:

  • Type: 1 (straight wheel)
  • Size: 200×20×32 mm
  • Outside diameter D: 200 mm
  • Wheel thickness T: 20 mm
  • Bore diameter H: 32 mm
  • Abrasive: 14A, regular aluminium oxide
  • Grit: FEPA F150
  • Wheel grade: J
  • Structure: 7
  • Bond: vitrified
  • Maximum operating speed: 35 m/s

Wheel grade J:

Medium-soft bond-holding characteristic.

  • Supports regular renewal of cutting edges
  • Performs well under moderate loading
  • Requires monitoring of wheel wear and profile retention

Structure 7:

Moderately open wheel structure.

  • More chip clearance
  • Improved coolant access to the grinding zone
  • Reduced risk of wheel loading during prolonged contact

Use for:

  • Peripheral grinding
  • Sharpening and sizing of working surfaces
  • Carbon and low-alloy steels
  • Steel billets, forgings and castings
  • Rough and semi-finish grinding

Do not use for:

  • Cemented carbide and technical ceramics
  • Precision grinding of hardened steel where a cooler-cutting friable grain is required
  • Side loading unless specifically permitted by the wheel design
  • Operation above 35 m/s

Before mounting, inspect the wheel for damage and confirm bore fit, mounting method and machine compatibility. Use the correct guard and follow the machine operating instructions.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
© Copyright - e-Store "Razvertka" Tokar tools - production and sale of tools You may not copy, reproduce, modify, publish, upload, transmit, and distribute any elements of this site, as well as their components, by any means and in any media without prior written permission.