750x63x305 54С Grinding wheel Type-1 F16 40 m/s on Bakelite bond Non-reinforced СТ2 3

In stock
SKU
325255-1
$670.69
More Information
Bond Bakelite
Wheel type 1
D - top diameter 750
T - wheel thickness 63
H - hole diameter 305
Abrasive 54С
Grain it FEPA F16
Hardness СТ2
Structure 3
Angle speed 40
Manufacturer ZAK
Country Ukraine

750×63×305 mm 54C Grinding Wheel – Type 1 – F16 – 40 m/s – Resinoid bond – Grade СТ2 – Structure 3

Type 1 abrasive grinding wheel (straight wheel) in size 750×63×305 mm.
A versatile geometry for peripheral grinding, sharpening, surface grinding or cylindrical grinding, subject to the machine setup.

This specification is designed for controlled grinding based on the abrasive type, grit size, wheel grade and structure.

What it actually does:

FEPA grit F16 positions this wheel for heavy rough grinding with a high stock-removal rate.
For this specification, maintain a clean, open and correctly dressed wheel surface.

Abrasive 54C — black silicon carbide:

A hard, sharp abrasive for low-tensile-strength materials and hard non-metallic surfaces.

  • Cast iron
  • Non-ferrous metals and alloys
  • Stone, glass and selected ceramic materials

FEPA grit size F16:

Very coarse to coarse grain size for bonded abrasive products.

  • High stock-removal capacity
  • A pronounced abrasive scratch pattern
  • Usually requires an allowance for subsequent finishing

Resinoid bond:

  • More resilient than a vitrified bond
  • Tolerates dynamic grinding loads
  • Suitable for productive stock removal

Limitation: The non-reinforced construction must be used only on compatible stationary equipment.

In practice:

Determine feed and infeed by a controlled trial while checking size, surface quality and the absence of grinding burn.

Specification:

  • Type: 1 (straight wheel)
  • Size: 750×63×305 mm
  • Outside diameter D: 750 mm
  • Wheel thickness T: 63 mm
  • Bore diameter H: 305 mm
  • Abrasive: 54C, black silicon carbide
  • Grit: FEPA F16
  • Wheel grade: СТ2
  • Structure: 3
  • Bond: resinoid (Bakelite), non-reinforced
  • Maximum operating speed: 40 m/s

Wheel grade СТ2:

Medium-hard bond-holding characteristic.

  • Retains abrasive grains more strongly
  • Maintains the working profile well
  • May glaze if the grinding load is too low

Structure 3:

Dense wheel structure.

  • High abrasive-grain concentration
  • Good retention of the working form
  • Requires careful control of loading and heat generation

Use for:

  • Peripheral grinding
  • Sharpening and sizing of working surfaces
  • Cast iron
  • Non-ferrous metals and alloys
  • Stone, glass and selected ceramic materials

Do not use for:

  • General-purpose grinding of carbon and alloy steels
  • Operations with severe impact on the brittle abrasive grain
  • Side loading unless specifically permitted by the wheel design
  • Operation above 40 m/s

Before mounting, inspect the wheel for damage and confirm bore fit, mounting method and machine compatibility. Use the correct guard and follow the machine operating instructions.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
© Copyright - e-Store "Razvertka" Tokar tools - production and sale of tools You may not copy, reproduce, modify, publish, upload, transmit, and distribute any elements of this site, as well as their components, by any means and in any media without prior written permission.