500x63x203 54С Grinding wheel Type-1 F22 50 m/s on Bakelite bond Non-reinforced СТ1 5

In stock
SKU
325247-1
$209.86
More Information
Bond Bakelite
Wheel type 1
D - top diameter 500
T - wheel thickness 63
H - hole diameter 203
Abrasive 54С
Grain it FEPA F22
Hardness СТ1
Structure 5
Angle speed 50
Manufacturer ZAK
Country Ukraine

500×63×203 mm 54C Grinding Wheel – Type 1 – F22 – 50 m/s – Resinoid bond – Grade СТ1 – Structure 5

Type 1 abrasive grinding wheel (straight wheel) in size 500×63×203 mm.
A versatile geometry for peripheral grinding, sharpening, surface grinding or cylindrical grinding, subject to the machine setup.

Its working behaviour is defined by the combination of wheel profile, abrasive grain, grade and porosity.

What it actually does:

FEPA grit F22 positions this wheel for heavy rough grinding with a high stock-removal rate.
For this specification, maintain a clean, open and correctly dressed wheel surface.

Abrasive 54C — black silicon carbide:

A hard, sharp abrasive for low-tensile-strength materials and hard non-metallic surfaces.

  • Cast iron
  • Non-ferrous metals and alloys
  • Stone, glass and selected ceramic materials

FEPA grit size F22:

Very coarse to coarse grain size for bonded abrasive products.

  • High stock-removal capacity
  • A pronounced abrasive scratch pattern
  • Usually requires an allowance for subsequent finishing

Resinoid bond:

  • More resilient than a vitrified bond
  • Tolerates dynamic grinding loads
  • Suitable for productive stock removal

Limitation: The non-reinforced construction must be used only on compatible stationary equipment.

In practice:

Determine feed and infeed by a controlled trial while checking size, surface quality and the absence of grinding burn.

Specification:

  • Type: 1 (straight wheel)
  • Size: 500×63×203 mm
  • Outside diameter D: 500 mm
  • Wheel thickness T: 63 mm
  • Bore diameter H: 203 mm
  • Abrasive: 54C, black silicon carbide
  • Grit: FEPA F22
  • Wheel grade: СТ1
  • Structure: 5
  • Bond: resinoid (Bakelite), non-reinforced
  • Maximum operating speed: 50 m/s

Wheel grade СТ1:

Medium-hard bond-holding characteristic.

  • Retains abrasive grains more strongly
  • Maintains the working profile well
  • May glaze if the grinding load is too low

Structure 5:

Medium wheel structure.

  • Balanced grain and pore volume
  • Stable form retention
  • Predictable performance under consistent loading

Use for:

  • Peripheral grinding
  • Sharpening and sizing of working surfaces
  • Cast iron
  • Non-ferrous metals and alloys
  • Stone, glass and selected ceramic materials

Do not use for:

  • General-purpose grinding of carbon and alloy steels
  • Operations with severe impact on the brittle abrasive grain
  • Side loading unless specifically permitted by the wheel design
  • Operation above 50 m/s

Before mounting, inspect the wheel for damage and confirm bore fit, mounting method and machine compatibility. Use the correct guard and follow the machine operating instructions.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
© Copyright - e-Store "Razvertka" Tokar tools - production and sale of tools You may not copy, reproduce, modify, publish, upload, transmit, and distribute any elements of this site, as well as their components, by any means and in any media without prior written permission.