400x40x127 54С Grinding wheel Type-1 F22 50 m/s on Bakelite bond Non-reinforced СТ3 5

In stock
SKU
325242-1
$93.74
More Information
Bond Bakelite
Wheel type 1
D - top diameter 400
T - wheel thickness 40
H - hole diameter 127
Abrasive 54С
Grain it FEPA F22
Hardness СТ3
Structure 5
Angle speed 50
Manufacturer ZAK
Country Ukraine

400×40×127 mm 54C Grinding Wheel – Type 1 – F22 – 50 m/s – Resinoid bond – Grade СТ3 – Structure 5

Type 1 abrasive grinding wheel (straight wheel) in size 400×40×127 mm.
A versatile geometry for peripheral grinding, sharpening, surface grinding or cylindrical grinding, subject to the machine setup.

Select this wheel with reference to the workpiece material, contact area and required grinding stage.

What it actually does:

FEPA grit F22 positions this wheel for heavy rough grinding with a high stock-removal rate.
For this specification, maintain a clean, open and correctly dressed wheel surface.

Abrasive 54C — black silicon carbide:

A hard, sharp abrasive for low-tensile-strength materials and hard non-metallic surfaces.

  • Cast iron
  • Non-ferrous metals and alloys
  • Stone, glass and selected ceramic materials

FEPA grit size F22:

Very coarse to coarse grain size for bonded abrasive products.

  • High stock-removal capacity
  • A pronounced abrasive scratch pattern
  • Usually requires an allowance for subsequent finishing

Resinoid bond:

  • More resilient than a vitrified bond
  • Tolerates dynamic grinding loads
  • Suitable for productive stock removal

Limitation: The non-reinforced construction must be used only on compatible stationary equipment.

In practice:

Determine feed and infeed by a controlled trial while checking size, surface quality and the absence of grinding burn.

Specification:

  • Type: 1 (straight wheel)
  • Size: 400×40×127 mm
  • Outside diameter D: 400 mm
  • Wheel thickness T: 40 mm
  • Bore diameter H: 127 mm
  • Abrasive: 54C, black silicon carbide
  • Grit: FEPA F22
  • Wheel grade: СТ3
  • Structure: 5
  • Bond: resinoid (Bakelite), non-reinforced
  • Maximum operating speed: 50 m/s

Wheel grade СТ3:

Medium-hard bond-holding characteristic.

  • Retains abrasive grains more strongly
  • Maintains the working profile well
  • May glaze if the grinding load is too low

Structure 5:

Medium wheel structure.

  • Balanced grain and pore volume
  • Stable form retention
  • Predictable performance under consistent loading

Use for:

  • Peripheral grinding
  • Sharpening and sizing of working surfaces
  • Cast iron
  • Non-ferrous metals and alloys
  • Stone, glass and selected ceramic materials

Do not use for:

  • General-purpose grinding of carbon and alloy steels
  • Operations with severe impact on the brittle abrasive grain
  • Side loading unless specifically permitted by the wheel design
  • Operation above 50 m/s

Before mounting, inspect the wheel for damage and confirm bore fit, mounting method and machine compatibility. Use the correct guard and follow the machine operating instructions.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
© Copyright - e-Store "Razvertka" Tokar tools - production and sale of tools You may not copy, reproduce, modify, publish, upload, transmit, and distribute any elements of this site, as well as their components, by any means and in any media without prior written permission.