We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
600x250x305 14А Grinding wheel Type-1 F46 35 m/s on Ceramic bond M 6
| Bond | Ceramic |
|---|---|
| Wheel type | 1 |
| D - top diameter | 600 |
| T - wheel thickness | 250 |
| H - hole diameter | 305 |
| Abrasive | 14А |
| Grain it FEPA | F46 |
| Hardness | M |
| Structure | 6 |
| Angle speed | 35 |
| Manufacturer | ZAK |
| Country | Ukraine |
600×250×305 mm 14A Grinding Wheel – Type 1 – F46 – 35 m/s – Vitrified bond – Grade M – Structure 6
Type 1 abrasive grinding wheel (straight wheel) in size 600×250×305 mm.
A versatile geometry for peripheral grinding, sharpening, surface grinding or cylindrical grinding, subject to the machine setup.
The specification is intended to provide predictable cutting action and stable development of the working surface.
What it actually does:
FEPA grit F46 positions this wheel for general roughing and semi-finishing.
The main objective of this configuration is to balance stock removal with reliable profile retention.
Abrasive 14A — regular aluminium oxide:
A tough aluminium oxide grain designed for productive grinding of materials with high tensile strength.
- Carbon and low-alloy steels
- Steel billets, forgings and castings
- Rough and semi-finish grinding
FEPA grit size F46:
Medium grain size for bonded abrasive products.
- Productive material removal
- Suitable for establishing geometry
- Leaves the surface ready for further finishing when tighter requirements apply
Vitrified bond:
- Provides strong form retention
- Can be dressed accurately
- Its porous matrix helps remove chips and heat
Limitation: Vitrified wheels are sensitive to impact and unauthorised side loading.
In practice:
Set the final operating parameters for the actual workpiece material and hardness without exceeding the marked wheel speed.
Specification:
- Type: 1 (straight wheel)
- Size: 600×250×305 mm
- Outside diameter D: 600 mm
- Wheel thickness T: 250 mm
- Bore diameter H: 305 mm
- Abrasive: 14A, regular aluminium oxide
- Grit: FEPA F46
- Wheel grade: M
- Structure: 6
- Bond: vitrified
- Maximum operating speed: 35 m/s
Wheel grade M:
Medium bond-holding characteristic.
- Balances self-sharpening and wheel life
- Stable performance with a consistent feed
- A versatile grade for steady grinding contact
Structure 6:
Medium wheel structure.
- Balanced grain and pore volume
- Stable form retention
- Predictable performance under consistent loading
Use for:
- Peripheral grinding
- Sharpening and sizing of working surfaces
- Carbon and low-alloy steels
- Steel billets, forgings and castings
- Rough and semi-finish grinding
Do not use for:
- Cemented carbide and technical ceramics
- Precision grinding of hardened steel where a cooler-cutting friable grain is required
- Side loading unless specifically permitted by the wheel design
- Operation above 35 m/s
Before mounting, inspect the wheel for damage and confirm bore fit, mounting method and machine compatibility. Use the correct guard and follow the machine operating instructions.