600x28x305 25А Grinding wheel Type-1 F80 35 m/s on Ceramic bond K 7

In stock
SKU
312351-10022
$215.51
More Information
Bond Ceramic
Wheel type 1
D - top diameter 600
T - wheel thickness 28
H - hole diameter 305
Abrasive 25А
Grain it FEPA F80
Hardness K
Structure 7
Angle speed 35
Manufacturer ZAK
Country Ukraine

600×28×305 mm 25A Grinding Wheel – Type 1 – F80 – 35 m/s – Vitrified bond – Grade K – Structure 7

Type 1 abrasive grinding wheel (straight wheel) in size 600×28×305 mm.
A versatile geometry for peripheral grinding, sharpening, surface grinding or cylindrical grinding, subject to the machine setup.

Select this wheel with reference to the workpiece material, contact area and required grinding stage.

What it actually does:

FEPA grit F80 positions this wheel for finish grinding and final size correction.
The main objective of this configuration is to balance stock removal with reliable profile retention.

Abrasive 25A — white fused aluminium oxide:

A high-purity, sharp and friable grain that renews its cutting edges and helps reduce the risk of thermal damage.

  • Hardened and tool steels
  • High-speed and alloy steels
  • Precision grinding and tool sharpening

FEPA grit size F80:

Fine grain size for bonded abrasive products.

  • Shallower grinding marks
  • Controlled surface quality
  • Requires stable feed and timely dressing

Vitrified bond:

  • Provides strong form retention
  • Can be dressed accurately
  • Its porous matrix helps remove chips and heat

Limitation: Vitrified wheels are sensitive to impact and unauthorised side loading.

In practice:

After mounting, verify free rotation, the safety guard and the no-load test required by the machine instructions.

Specification:

  • Type: 1 (straight wheel)
  • Size: 600×28×305 mm
  • Outside diameter D: 600 mm
  • Wheel thickness T: 28 mm
  • Bore diameter H: 305 mm
  • Abrasive: 25A, white fused aluminium oxide
  • Grit: FEPA F80
  • Wheel grade: K
  • Structure: 7
  • Bond: vitrified
  • Maximum operating speed: 35 m/s

Wheel grade K:

Medium-soft bond-holding characteristic.

  • Supports regular renewal of cutting edges
  • Performs well under moderate loading
  • Requires monitoring of wheel wear and profile retention

Structure 7:

Moderately open wheel structure.

  • More chip clearance
  • Improved coolant access to the grinding zone
  • Reduced risk of wheel loading during prolonged contact

Use for:

  • Peripheral grinding
  • Sharpening and sizing of working surfaces
  • Hardened and tool steels
  • High-speed and alloy steels
  • Precision grinding and tool sharpening

Do not use for:

  • Cemented carbide, glass and ceramics, where silicon carbide is generally more suitable
  • Heavy snagging with severe impact loading
  • Side loading unless specifically permitted by the wheel design
  • Operation above 35 m/s

Before mounting, inspect the wheel for damage and confirm bore fit, mounting method and machine compatibility. Use the correct guard and follow the machine operating instructions.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
© Copyright - e-Store "Razvertka" Tokar tools - production and sale of tools You may not copy, reproduce, modify, publish, upload, transmit, and distribute any elements of this site, as well as their components, by any means and in any media without prior written permission.