100x20x32 25А Grinding wheel Type-1 F60 35 m/s on Ceramic bond L 7

In stock
SKU
312317-10419
$4.75
More Information
Bond Ceramic
Wheel type 1
D - top diameter 100
T - wheel thickness 20
H - hole diameter 32
Abrasive 25А
Grain it FEPA F60
Hardness L
Structure 7
Angle speed 35
Manufacturer ZAK
Country Ukraine

100×20×32 mm 25A Grinding Wheel – Type 1 – F60 – 35 m/s – Vitrified bond – Grade L – Structure 7

Type 1 abrasive grinding wheel (straight wheel) in size 100×20×32 mm.
A versatile geometry for peripheral grinding, sharpening, surface grinding or cylindrical grinding, subject to the machine setup.

Consistent results require the correct combination of feed, dressing, coolant application and contact area.

What it actually does:

FEPA grit F60 positions this wheel for semi-finish grinding with controlled stock removal.
The main objective of this configuration is to balance stock removal with reliable profile retention.

Abrasive 25A — white fused aluminium oxide:

A high-purity, sharp and friable grain that renews its cutting edges and helps reduce the risk of thermal damage.

  • Hardened and tool steels
  • High-speed and alloy steels
  • Precision grinding and tool sharpening

FEPA grit size F60:

Medium-fine grain size for bonded abrasive products.

  • Balanced cutting performance
  • A more uniform surface than coarse grits
  • Suitable preparation for a finishing pass

Vitrified bond:

  • Provides strong form retention
  • Can be dressed accurately
  • Its porous matrix helps remove chips and heat

Limitation: Vitrified wheels are sensitive to impact and unauthorised side loading.

In practice:

With a large contact area, chip clearance, coolant supply and timely opening of the wheel face become especially important.

Specification:

  • Type: 1 (straight wheel)
  • Size: 100×20×32 mm
  • Outside diameter D: 100 mm
  • Wheel thickness T: 20 mm
  • Bore diameter H: 32 mm
  • Abrasive: 25A, white fused aluminium oxide
  • Grit: FEPA F60
  • Wheel grade: L
  • Structure: 7
  • Bond: vitrified
  • Maximum operating speed: 35 m/s

Wheel grade L:

Medium-soft bond-holding characteristic.

  • Supports regular renewal of cutting edges
  • Performs well under moderate loading
  • Requires monitoring of wheel wear and profile retention

Structure 7:

Moderately open wheel structure.

  • More chip clearance
  • Improved coolant access to the grinding zone
  • Reduced risk of wheel loading during prolonged contact

Use for:

  • Peripheral grinding
  • Sharpening and sizing of working surfaces
  • Hardened and tool steels
  • High-speed and alloy steels
  • Precision grinding and tool sharpening

Do not use for:

  • Cemented carbide, glass and ceramics, where silicon carbide is generally more suitable
  • Heavy snagging with severe impact loading
  • Side loading unless specifically permitted by the wheel design
  • Operation above 35 m/s

Before mounting, inspect the wheel for damage and confirm bore fit, mounting method and machine compatibility. Use the correct guard and follow the machine operating instructions.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
© Copyright - e-Store "Razvertka" Tokar tools - production and sale of tools You may not copy, reproduce, modify, publish, upload, transmit, and distribute any elements of this site, as well as their components, by any means and in any media without prior written permission.