300x40x127 64С Grinding wheel Type-1 F60 35 m/s on Ceramic bond P 6

In stock
SKU
316335-10104
$93.46
More Information
Bond Ceramic
Wheel type 1
D - top diameter 300
T - wheel thickness 40
H - hole diameter 127
Abrasive 64С
Grain it FEPA F60
Hardness P
Structure 6
Angle speed 35
Manufacturer ZAK
Country Ukraine

300×40×127 mm 64C Grinding Wheel – Type 1 – F60 – 35 m/s – Vitrified bond – Grade P – Structure 6

Type 1 abrasive grinding wheel (straight wheel) in size 300×40×127 mm.
A versatile geometry for peripheral grinding, sharpening, surface grinding or cylindrical grinding, subject to the machine setup.

Performance depends not only on the dimensions, but also on the abrasive type, grit size, grade and structure.

What it actually does:

FEPA grit F60 positions this wheel for semi-finish grinding with controlled stock removal.
The main objective of this configuration is to balance stock removal with reliable profile retention.

Abrasive 64C — green silicon carbide:

A very hard and friable abrasive with sharp cutting edges for cemented carbides and brittle non-metallic materials.

  • Cemented carbides
  • Technical ceramics and glass
  • Mineral materials and precision sharpening of carbide tools

FEPA grit size F60:

Medium-fine grain size for bonded abrasive products.

  • Balanced cutting performance
  • A more uniform surface than coarse grits
  • Suitable preparation for a finishing pass

Vitrified bond:

  • Provides strong form retention
  • Can be dressed accurately
  • Its porous matrix helps remove chips and heat

Limitation: Vitrified wheels are sensitive to impact and unauthorised side loading.

In practice:

After mounting, verify free rotation, the safety guard and the no-load test required by the machine instructions.

Specification:

  • Type: 1 (straight wheel)
  • Size: 300×40×127 mm
  • Outside diameter D: 300 mm
  • Wheel thickness T: 40 mm
  • Bore diameter H: 127 mm
  • Abrasive: 64C, green silicon carbide
  • Grit: FEPA F60
  • Wheel grade: P
  • Structure: 6
  • Bond: vitrified
  • Maximum operating speed: 35 m/s

Wheel grade P:

Medium-hard bond-holding characteristic.

  • Retains abrasive grains more strongly
  • Maintains the working profile well
  • May glaze if the grinding load is too low

Structure 6:

Medium wheel structure.

  • Balanced grain and pore volume
  • Stable form retention
  • Predictable performance under consistent loading

Use for:

  • Peripheral grinding
  • Sharpening and sizing of working surfaces
  • Cemented carbides
  • Technical ceramics and glass
  • Mineral materials and precision sharpening of carbide tools

Do not use for:

  • Carbon and alloy steels as the primary workpiece material
  • Heavy impact grinding
  • Side loading unless specifically permitted by the wheel design
  • Operation above 35 m/s

Before mounting, inspect the wheel for damage and confirm bore fit, mounting method and machine compatibility. Use the correct guard and follow the machine operating instructions.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
© Copyright - e-Store "Razvertka" Tokar tools - production and sale of tools You may not copy, reproduce, modify, publish, upload, transmit, and distribute any elements of this site, as well as their components, by any means and in any media without prior written permission.