500x100x305 54С Grinding wheel Type-1 F60 35 m/s on Ceramic bond L 7

In stock
SKU
315348-10008
$364.61
More Information
Bond Ceramic
Wheel type 1
D - top diameter 500
T - wheel thickness 100
H - hole diameter 305
Abrasive 54С
Grain it FEPA F60
Hardness L
Structure 7
Angle speed 35
Manufacturer ZAK
Country Ukraine

500×100×305 mm 54C Grinding Wheel – Type 1 – F60 – 35 m/s – Vitrified bond – Grade L – Structure 7

Type 1 abrasive grinding wheel (straight wheel) in size 500×100×305 mm.
A versatile geometry for peripheral grinding, sharpening, surface grinding or cylindrical grinding, subject to the machine setup.

This specification is designed for controlled grinding based on the abrasive type, grit size, wheel grade and structure.

What it actually does:

FEPA grit F60 positions this wheel for semi-finish grinding with controlled stock removal.
For this specification, maintain a clean, open and correctly dressed wheel surface.

Abrasive 54C — black silicon carbide:

A hard, sharp abrasive for low-tensile-strength materials and hard non-metallic surfaces.

  • Cast iron
  • Non-ferrous metals and alloys
  • Stone, glass and selected ceramic materials

FEPA grit size F60:

Medium-fine grain size for bonded abrasive products.

  • Balanced cutting performance
  • A more uniform surface than coarse grits
  • Suitable preparation for a finishing pass

Vitrified bond:

  • Provides strong form retention
  • Can be dressed accurately
  • Its porous matrix helps remove chips and heat

Limitation: Vitrified wheels are sensitive to impact and unauthorised side loading.

In practice:

Start with a moderate feed and adjust the process according to surface condition, grinding sound and spindle load.

Specification:

  • Type: 1 (straight wheel)
  • Size: 500×100×305 mm
  • Outside diameter D: 500 mm
  • Wheel thickness T: 100 mm
  • Bore diameter H: 305 mm
  • Abrasive: 54C, black silicon carbide
  • Grit: FEPA F60
  • Wheel grade: L
  • Structure: 7
  • Bond: vitrified
  • Maximum operating speed: 35 m/s

Wheel grade L:

Medium-soft bond-holding characteristic.

  • Supports regular renewal of cutting edges
  • Performs well under moderate loading
  • Requires monitoring of wheel wear and profile retention

Structure 7:

Moderately open wheel structure.

  • More chip clearance
  • Improved coolant access to the grinding zone
  • Reduced risk of wheel loading during prolonged contact

Use for:

  • Peripheral grinding
  • Sharpening and sizing of working surfaces
  • Cast iron
  • Non-ferrous metals and alloys
  • Stone, glass and selected ceramic materials

Do not use for:

  • General-purpose grinding of carbon and alloy steels
  • Operations with severe impact on the brittle abrasive grain
  • Side loading unless specifically permitted by the wheel design
  • Operation above 35 m/s

Before mounting, inspect the wheel for damage and confirm bore fit, mounting method and machine compatibility. Use the correct guard and follow the machine operating instructions.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
© Copyright - e-Store "Razvertka" Tokar tools - production and sale of tools You may not copy, reproduce, modify, publish, upload, transmit, and distribute any elements of this site, as well as their components, by any means and in any media without prior written permission.