250x25x76 54С Grinding wheel Type-1 F100 35 m/s on Ceramic bond K 7

In stock
SKU
315434-10405
$34.19
More Information
Bond Ceramic
Wheel type 1
D - top diameter 250
T - wheel thickness 25
H - hole diameter 76
Abrasive 54С
Grain it FEPA F100
Hardness K
Structure 7
Angle speed 35
Manufacturer ZAK
Country Ukraine

250×25×76 mm 54C Grinding Wheel – Type 1 – F100 – 35 m/s – Vitrified bond – Grade K – Structure 7

Type 1 abrasive grinding wheel (straight wheel) in size 250×25×76 mm.
A versatile geometry for peripheral grinding, sharpening, surface grinding or cylindrical grinding, subject to the machine setup.

These parameters balance stock removal, wheel life and surface quality for the intended operation.

What it actually does:

FEPA grit F100 positions this wheel for finish grinding and final size correction.
The main objective of this configuration is to balance stock removal with reliable profile retention.

Abrasive 54C — black silicon carbide:

A hard, sharp abrasive for low-tensile-strength materials and hard non-metallic surfaces.

  • Cast iron
  • Non-ferrous metals and alloys
  • Stone, glass and selected ceramic materials

FEPA grit size F100:

Fine grain size for bonded abrasive products.

  • Shallower grinding marks
  • Controlled surface quality
  • Requires stable feed and timely dressing

Vitrified bond:

  • Provides strong form retention
  • Can be dressed accurately
  • Its porous matrix helps remove chips and heat

Limitation: Vitrified wheels are sensitive to impact and unauthorised side loading.

In practice:

Determine feed and infeed by a controlled trial while checking size, surface quality and the absence of grinding burn.

Specification:

  • Type: 1 (straight wheel)
  • Size: 250×25×76 mm
  • Outside diameter D: 250 mm
  • Wheel thickness T: 25 mm
  • Bore diameter H: 76 mm
  • Abrasive: 54C, black silicon carbide
  • Grit: FEPA F100
  • Wheel grade: K
  • Structure: 7
  • Bond: vitrified
  • Maximum operating speed: 35 m/s

Wheel grade K:

Medium-soft bond-holding characteristic.

  • Supports regular renewal of cutting edges
  • Performs well under moderate loading
  • Requires monitoring of wheel wear and profile retention

Structure 7:

Moderately open wheel structure.

  • More chip clearance
  • Improved coolant access to the grinding zone
  • Reduced risk of wheel loading during prolonged contact

Use for:

  • Peripheral grinding
  • Sharpening and sizing of working surfaces
  • Cast iron
  • Non-ferrous metals and alloys
  • Stone, glass and selected ceramic materials

Do not use for:

  • General-purpose grinding of carbon and alloy steels
  • Operations with severe impact on the brittle abrasive grain
  • Side loading unless specifically permitted by the wheel design
  • Operation above 35 m/s

Before mounting, inspect the wheel for damage and confirm bore fit, mounting method and machine compatibility. Use the correct guard and follow the machine operating instructions.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
© Copyright - e-Store "Razvertka" Tokar tools - production and sale of tools You may not copy, reproduce, modify, publish, upload, transmit, and distribute any elements of this site, as well as their components, by any means and in any media without prior written permission.