650x67x305 54С Grinding wheel Type-1 F150 35 m/s on Ceramic bond N 8

In stock
SKU
315459-10002
$555.77
More Information
Bond Ceramic
Wheel type 1
D - top diameter 650
T - wheel thickness 67
H - hole diameter 305
Abrasive 54С
Grain it FEPA F150
Hardness N
Structure 8
Angle speed 35
Manufacturer ZAK
Country Ukraine

650×67×305 mm 54C Grinding Wheel – Type 1 – F150 – 35 m/s – Vitrified bond – Grade N – Structure 8

Type 1 abrasive grinding wheel (straight wheel) in size 650×67×305 mm.
A versatile geometry for peripheral grinding, sharpening, surface grinding or cylindrical grinding, subject to the machine setup.

Performance depends not only on the dimensions, but also on the abrasive type, grit size, grade and structure.

What it actually does:

FEPA grit F150 positions this wheel for fine finishing and precision sizing.
The main objective of this configuration is to balance stock removal with reliable profile retention.

Abrasive 54C — black silicon carbide:

A hard, sharp abrasive for low-tensile-strength materials and hard non-metallic surfaces.

  • Cast iron
  • Non-ferrous metals and alloys
  • Stone, glass and selected ceramic materials

FEPA grit size F150:

Very fine grain size for bonded abrasive products.

  • Low stock removal per pass
  • High surface uniformity
  • Sensitive to overloading and wheel loading

Vitrified bond:

  • Provides strong form retention
  • Can be dressed accurately
  • Its porous matrix helps remove chips and heat

Limitation: Vitrified wheels are sensitive to impact and unauthorised side loading.

In practice:

Determine feed and infeed by a controlled trial while checking size, surface quality and the absence of grinding burn.

Specification:

  • Type: 1 (straight wheel)
  • Size: 650×67×305 mm
  • Outside diameter D: 650 mm
  • Wheel thickness T: 67 mm
  • Bore diameter H: 305 mm
  • Abrasive: 54C, black silicon carbide
  • Grit: FEPA F150
  • Wheel grade: N
  • Structure: 8
  • Bond: vitrified
  • Maximum operating speed: 35 m/s

Wheel grade N:

Medium bond-holding characteristic.

  • Balances self-sharpening and wheel life
  • Stable performance with a consistent feed
  • A versatile grade for steady grinding contact

Structure 8:

Open wheel structure.

  • More chip clearance
  • Improved coolant access to the grinding zone
  • Reduced risk of wheel loading during prolonged contact

Use for:

  • Peripheral grinding
  • Sharpening and sizing of working surfaces
  • Cast iron
  • Non-ferrous metals and alloys
  • Stone, glass and selected ceramic materials

Do not use for:

  • General-purpose grinding of carbon and alloy steels
  • Operations with severe impact on the brittle abrasive grain
  • Side loading unless specifically permitted by the wheel design
  • Operation above 35 m/s

Before mounting, inspect the wheel for damage and confirm bore fit, mounting method and machine compatibility. Use the correct guard and follow the machine operating instructions.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
© Copyright - e-Store "Razvertka" Tokar tools - production and sale of tools You may not copy, reproduce, modify, publish, upload, transmit, and distribute any elements of this site, as well as their components, by any means and in any media without prior written permission.