250x63x127 54С Grinding wheel Type-1 F46 35 m/s on Ceramic bond O 6

In stock
SKU
315337-10142
$66.88
More Information
Bond Ceramic
Wheel type 1
D - top diameter 250
T - wheel thickness 63
H - hole diameter 127
Abrasive 54С
Grain it FEPA F46
Hardness O
Structure 6
Angle speed 35
Manufacturer ZAK
Country Ukraine

250×63×127 mm 54C Grinding Wheel – Type 1 – F46 – 35 m/s – Vitrified bond – Grade O – Structure 6

Type 1 abrasive grinding wheel (straight wheel) in size 250×63×127 mm.
A versatile geometry for peripheral grinding, sharpening, surface grinding or cylindrical grinding, subject to the machine setup.

These parameters balance stock removal, wheel life and surface quality for the intended operation.

What it actually does:

FEPA grit F46 positions this wheel for general roughing and semi-finishing.
For this specification, maintain a clean, open and correctly dressed wheel surface.

Abrasive 54C — black silicon carbide:

A hard, sharp abrasive for low-tensile-strength materials and hard non-metallic surfaces.

  • Cast iron
  • Non-ferrous metals and alloys
  • Stone, glass and selected ceramic materials

FEPA grit size F46:

Medium grain size for bonded abrasive products.

  • Productive material removal
  • Suitable for establishing geometry
  • Leaves the surface ready for further finishing when tighter requirements apply

Vitrified bond:

  • Provides strong form retention
  • Can be dressed accurately
  • Its porous matrix helps remove chips and heat

Limitation: Vitrified wheels are sensitive to impact and unauthorised side loading.

In practice:

Start with a moderate feed and adjust the process according to surface condition, grinding sound and spindle load.

Specification:

  • Type: 1 (straight wheel)
  • Size: 250×63×127 mm
  • Outside diameter D: 250 mm
  • Wheel thickness T: 63 mm
  • Bore diameter H: 127 mm
  • Abrasive: 54C, black silicon carbide
  • Grit: FEPA F46
  • Wheel grade: O
  • Structure: 6
  • Bond: vitrified
  • Maximum operating speed: 35 m/s

Wheel grade O:

Medium-hard bond-holding characteristic.

  • Retains abrasive grains more strongly
  • Maintains the working profile well
  • May glaze if the grinding load is too low

Structure 6:

Medium wheel structure.

  • Balanced grain and pore volume
  • Stable form retention
  • Predictable performance under consistent loading

Use for:

  • Peripheral grinding
  • Sharpening and sizing of working surfaces
  • Cast iron
  • Non-ferrous metals and alloys
  • Stone, glass and selected ceramic materials

Do not use for:

  • General-purpose grinding of carbon and alloy steels
  • Operations with severe impact on the brittle abrasive grain
  • Side loading unless specifically permitted by the wheel design
  • Operation above 35 m/s

Before mounting, inspect the wheel for damage and confirm bore fit, mounting method and machine compatibility. Use the correct guard and follow the machine operating instructions.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
© Copyright - e-Store "Razvertka" Tokar tools - production and sale of tools You may not copy, reproduce, modify, publish, upload, transmit, and distribute any elements of this site, as well as their components, by any means and in any media without prior written permission.