We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
450x63x203 54С Grinding wheel Type-1 F46 35 m/s on Ceramic bond N 6
| Bond | Ceramic |
|---|---|
| Wheel type | 1 |
| D - top diameter | 450 |
| T - wheel thickness | 63 |
| H - hole diameter | 203 |
| Abrasive | 54С |
| Grain it FEPA | F46 |
| Hardness | N |
| Structure | 6 |
| Angle speed | 35 |
| Manufacturer | ZAK |
| Country | Ukraine |
450×63×203 mm 54C Grinding Wheel – Type 1 – F46 – 35 m/s – Vitrified bond – Grade N – Structure 6
Type 1 abrasive grinding wheel (straight wheel) in size 450×63×203 mm.
A versatile geometry for peripheral grinding, sharpening, surface grinding or cylindrical grinding, subject to the machine setup.
This wheel size is intended for stationary grinding under parameters matched to the machine and workpiece material.
What it actually does:
FEPA grit F46 positions this wheel for general roughing and semi-finishing.
For this specification, maintain a clean, open and correctly dressed wheel surface.
Abrasive 54C — black silicon carbide:
A hard, sharp abrasive for low-tensile-strength materials and hard non-metallic surfaces.
- Cast iron
- Non-ferrous metals and alloys
- Stone, glass and selected ceramic materials
FEPA grit size F46:
Medium grain size for bonded abrasive products.
- Productive material removal
- Suitable for establishing geometry
- Leaves the surface ready for further finishing when tighter requirements apply
Vitrified bond:
- Provides strong form retention
- Can be dressed accurately
- Its porous matrix helps remove chips and heat
Limitation: Vitrified wheels are sensitive to impact and unauthorised side loading.
In practice:
Start with a moderate feed and adjust the process according to surface condition, grinding sound and spindle load.
Specification:
- Type: 1 (straight wheel)
- Size: 450×63×203 mm
- Outside diameter D: 450 mm
- Wheel thickness T: 63 mm
- Bore diameter H: 203 mm
- Abrasive: 54C, black silicon carbide
- Grit: FEPA F46
- Wheel grade: N
- Structure: 6
- Bond: vitrified
- Maximum operating speed: 35 m/s
Wheel grade N:
Medium bond-holding characteristic.
- Balances self-sharpening and wheel life
- Stable performance with a consistent feed
- A versatile grade for steady grinding contact
Structure 6:
Medium wheel structure.
- Balanced grain and pore volume
- Stable form retention
- Predictable performance under consistent loading
Use for:
- Peripheral grinding
- Sharpening and sizing of working surfaces
- Cast iron
- Non-ferrous metals and alloys
- Stone, glass and selected ceramic materials
Do not use for:
- General-purpose grinding of carbon and alloy steels
- Operations with severe impact on the brittle abrasive grain
- Side loading unless specifically permitted by the wheel design
- Operation above 35 m/s
Before mounting, inspect the wheel for damage and confirm bore fit, mounting method and machine compatibility. Use the correct guard and follow the machine operating instructions.