We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
175x32x32 25А Grinding wheel Type-1 F60 35 m/s on Ceramic bond K 7
| Bond | Ceramic |
|---|---|
| Wheel type | 1 |
| D - top diameter | 175 |
| T - wheel thickness | 32 |
| H - hole diameter | 32 |
| Abrasive | 25А |
| Grain it FEPA | F60 |
| Hardness | K |
| Structure | 7 |
| Angle speed | 35 |
| Manufacturer | ZAK |
| Country | Ukraine |
175×32×32 mm 25A Grinding Wheel – Type 1 – F60 – 35 m/s – Vitrified bond – Grade K – Structure 7
Type 1 abrasive grinding wheel (straight wheel) in size 175×32×32 mm.
A versatile geometry for peripheral grinding, sharpening, surface grinding or cylindrical grinding, subject to the machine setup.
These parameters balance stock removal, wheel life and surface quality for the intended operation.
What it actually does:
FEPA grit F60 positions this wheel for semi-finish grinding with controlled stock removal.
The main objective of this configuration is to balance stock removal with reliable profile retention.
Abrasive 25A — white fused aluminium oxide:
A high-purity, sharp and friable grain that renews its cutting edges and helps reduce the risk of thermal damage.
- Hardened and tool steels
- High-speed and alloy steels
- Precision grinding and tool sharpening
FEPA grit size F60:
Medium-fine grain size for bonded abrasive products.
- Balanced cutting performance
- A more uniform surface than coarse grits
- Suitable preparation for a finishing pass
Vitrified bond:
- Provides strong form retention
- Can be dressed accurately
- Its porous matrix helps remove chips and heat
Limitation: Vitrified wheels are sensitive to impact and unauthorised side loading.
In practice:
With a large contact area, chip clearance, coolant supply and timely opening of the wheel face become especially important.
Specification:
- Type: 1 (straight wheel)
- Size: 175×32×32 mm
- Outside diameter D: 175 mm
- Wheel thickness T: 32 mm
- Bore diameter H: 32 mm
- Abrasive: 25A, white fused aluminium oxide
- Grit: FEPA F60
- Wheel grade: K
- Structure: 7
- Bond: vitrified
- Maximum operating speed: 35 m/s
Wheel grade K:
Medium-soft bond-holding characteristic.
- Supports regular renewal of cutting edges
- Performs well under moderate loading
- Requires monitoring of wheel wear and profile retention
Structure 7:
Moderately open wheel structure.
- More chip clearance
- Improved coolant access to the grinding zone
- Reduced risk of wheel loading during prolonged contact
Use for:
- Peripheral grinding
- Sharpening and sizing of working surfaces
- Hardened and tool steels
- High-speed and alloy steels
- Precision grinding and tool sharpening
Do not use for:
- Cemented carbide, glass and ceramics, where silicon carbide is generally more suitable
- Heavy snagging with severe impact loading
- Side loading unless specifically permitted by the wheel design
- Operation above 35 m/s
Before mounting, inspect the wheel for damage and confirm bore fit, mounting method and machine compatibility. Use the correct guard and follow the machine operating instructions.