750x100x305 64С Grinding wheel Type-1 F60 50 m/s on Ceramic bond K 7

In stock
SKU
316355-10033
$1,389.68
More Information
Bond Ceramic
Wheel type 1
D - top diameter 750
T - wheel thickness 100
H - hole diameter 305
Abrasive 64С
Grain it FEPA F60
Hardness K
Structure 7
Angle speed 50
Manufacturer ZAK
Country Ukraine

750×100×305 mm 64C Grinding Wheel – Type 1 – F60 – 50 m/s – Vitrified bond – Grade K – Structure 7

Type 1 abrasive grinding wheel (straight wheel) in size 750×100×305 mm.
A versatile geometry for peripheral grinding, sharpening, surface grinding or cylindrical grinding, subject to the machine setup.

Its working behaviour is defined by the combination of wheel profile, abrasive grain, grade and porosity.

What it actually does:

FEPA grit F60 positions this wheel for semi-finish grinding with controlled stock removal.
The main objective of this configuration is to balance stock removal with reliable profile retention.

Abrasive 64C — green silicon carbide:

A very hard and friable abrasive with sharp cutting edges for cemented carbides and brittle non-metallic materials.

  • Cemented carbides
  • Technical ceramics and glass
  • Mineral materials and precision sharpening of carbide tools

FEPA grit size F60:

Medium-fine grain size for bonded abrasive products.

  • Balanced cutting performance
  • A more uniform surface than coarse grits
  • Suitable preparation for a finishing pass

Vitrified bond:

  • Provides strong form retention
  • Can be dressed accurately
  • Its porous matrix helps remove chips and heat

Limitation: Vitrified wheels are sensitive to impact and unauthorised side loading.

In practice:

Repeatable results depend on accurate dressing, system rigidity and a consistent feed rate.

Specification:

  • Type: 1 (straight wheel)
  • Size: 750×100×305 mm
  • Outside diameter D: 750 mm
  • Wheel thickness T: 100 mm
  • Bore diameter H: 305 mm
  • Abrasive: 64C, green silicon carbide
  • Grit: FEPA F60
  • Wheel grade: K
  • Structure: 7
  • Bond: vitrified
  • Maximum operating speed: 50 m/s

Wheel grade K:

Medium-soft bond-holding characteristic.

  • Supports regular renewal of cutting edges
  • Performs well under moderate loading
  • Requires monitoring of wheel wear and profile retention

Structure 7:

Moderately open wheel structure.

  • More chip clearance
  • Improved coolant access to the grinding zone
  • Reduced risk of wheel loading during prolonged contact

Use for:

  • Peripheral grinding
  • Sharpening and sizing of working surfaces
  • Cemented carbides
  • Technical ceramics and glass
  • Mineral materials and precision sharpening of carbide tools

Do not use for:

  • Carbon and alloy steels as the primary workpiece material
  • Heavy impact grinding
  • Side loading unless specifically permitted by the wheel design
  • Operation above 50 m/s

Before mounting, inspect the wheel for damage and confirm bore fit, mounting method and machine compatibility. Use the correct guard and follow the machine operating instructions.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
© Copyright - e-Store "Razvertka" Tokar tools - production and sale of tools You may not copy, reproduce, modify, publish, upload, transmit, and distribute any elements of this site, as well as their components, by any means and in any media without prior written permission.