500x125x305 25А Grinding wheel Type-1 F120 50 m/s on Ceramic bond J 7

In stock
SKU
312448-2
$543.52
More Information
Bond Ceramic
Wheel type 1
D - top diameter 500
T - wheel thickness 125
H - hole diameter 305
Abrasive 25А
Grain it FEPA F120
Hardness J
Structure 7
Angle speed 50
Manufacturer ZAK
Country Ukraine

500×125×305 mm 25A Grinding Wheel – Type 1 – F120 – 50 m/s – Vitrified bond – Grade J – Structure 7

Type 1 abrasive grinding wheel (straight wheel) in size 500×125×305 mm.
A versatile geometry for peripheral grinding, sharpening, surface grinding or cylindrical grinding, subject to the machine setup.

Performance depends not only on the dimensions, but also on the abrasive type, grit size, grade and structure.

What it actually does:

FEPA grit F120 positions this wheel for fine finishing and precision sizing.
For this specification, maintain a clean, open and correctly dressed wheel surface.

Abrasive 25A — white fused aluminium oxide:

A high-purity, sharp and friable grain that renews its cutting edges and helps reduce the risk of thermal damage.

  • Hardened and tool steels
  • High-speed and alloy steels
  • Precision grinding and tool sharpening

FEPA grit size F120:

Very fine grain size for bonded abrasive products.

  • Low stock removal per pass
  • High surface uniformity
  • Sensitive to overloading and wheel loading

Vitrified bond:

  • Provides strong form retention
  • Can be dressed accurately
  • Its porous matrix helps remove chips and heat

Limitation: Vitrified wheels are sensitive to impact and unauthorised side loading.

In practice:

Before production use, make a trial pass and check heat generation, stock removal and the condition of the wheel face.

Specification:

  • Type: 1 (straight wheel)
  • Size: 500×125×305 mm
  • Outside diameter D: 500 mm
  • Wheel thickness T: 125 mm
  • Bore diameter H: 305 mm
  • Abrasive: 25A, white fused aluminium oxide
  • Grit: FEPA F120
  • Wheel grade: J
  • Structure: 7
  • Bond: vitrified
  • Maximum operating speed: 50 m/s

Wheel grade J:

Medium-soft bond-holding characteristic.

  • Supports regular renewal of cutting edges
  • Performs well under moderate loading
  • Requires monitoring of wheel wear and profile retention

Structure 7:

Moderately open wheel structure.

  • More chip clearance
  • Improved coolant access to the grinding zone
  • Reduced risk of wheel loading during prolonged contact

Use for:

  • Peripheral grinding
  • Sharpening and sizing of working surfaces
  • Hardened and tool steels
  • High-speed and alloy steels
  • Precision grinding and tool sharpening

Do not use for:

  • Cemented carbide, glass and ceramics, where silicon carbide is generally more suitable
  • Heavy snagging with severe impact loading
  • Side loading unless specifically permitted by the wheel design
  • Operation above 50 m/s

Before mounting, inspect the wheel for damage and confirm bore fit, mounting method and machine compatibility. Use the correct guard and follow the machine operating instructions.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
© Copyright - e-Store "Razvertka" Tokar tools - production and sale of tools You may not copy, reproduce, modify, publish, upload, transmit, and distribute any elements of this site, as well as their components, by any means and in any media without prior written permission.