We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
350x100x203 25А Grinding wheel Type-1 F120 50 m/s on Ceramic bond J 7
| Bond | Ceramic |
|---|---|
| Wheel type | 1 |
| D - top diameter | 350 |
| T - wheel thickness | 100 |
| H - hole diameter | 203 |
| Abrasive | 25А |
| Grain it FEPA | F120 |
| Hardness | J |
| Structure | 7 |
| Angle speed | 50 |
| Manufacturer | ZAK |
| Country | Ukraine |
350×100×203 mm 25A Grinding Wheel – Type 1 – F120 – 50 m/s – Vitrified bond – Grade J – Structure 7
Type 1 abrasive grinding wheel (straight wheel) in size 350×100×203 mm.
A versatile geometry for peripheral grinding, sharpening, surface grinding or cylindrical grinding, subject to the machine setup.
Consistent results require the correct combination of feed, dressing, coolant application and contact area.
What it actually does:
FEPA grit F120 positions this wheel for fine finishing and precision sizing.
For this specification, maintain a clean, open and correctly dressed wheel surface.
Abrasive 25A — white fused aluminium oxide:
A high-purity, sharp and friable grain that renews its cutting edges and helps reduce the risk of thermal damage.
- Hardened and tool steels
- High-speed and alloy steels
- Precision grinding and tool sharpening
FEPA grit size F120:
Very fine grain size for bonded abrasive products.
- Low stock removal per pass
- High surface uniformity
- Sensitive to overloading and wheel loading
Vitrified bond:
- Provides strong form retention
- Can be dressed accurately
- Its porous matrix helps remove chips and heat
Limitation: Vitrified wheels are sensitive to impact and unauthorised side loading.
In practice:
Before production use, make a trial pass and check heat generation, stock removal and the condition of the wheel face.
Specification:
- Type: 1 (straight wheel)
- Size: 350×100×203 mm
- Outside diameter D: 350 mm
- Wheel thickness T: 100 mm
- Bore diameter H: 203 mm
- Abrasive: 25A, white fused aluminium oxide
- Grit: FEPA F120
- Wheel grade: J
- Structure: 7
- Bond: vitrified
- Maximum operating speed: 50 m/s
Wheel grade J:
Medium-soft bond-holding characteristic.
- Supports regular renewal of cutting edges
- Performs well under moderate loading
- Requires monitoring of wheel wear and profile retention
Structure 7:
Moderately open wheel structure.
- More chip clearance
- Improved coolant access to the grinding zone
- Reduced risk of wheel loading during prolonged contact
Use for:
- Peripheral grinding
- Sharpening and sizing of working surfaces
- Hardened and tool steels
- High-speed and alloy steels
- Precision grinding and tool sharpening
Do not use for:
- Cemented carbide, glass and ceramics, where silicon carbide is generally more suitable
- Heavy snagging with severe impact loading
- Side loading unless specifically permitted by the wheel design
- Operation above 50 m/s
Before mounting, inspect the wheel for damage and confirm bore fit, mounting method and machine compatibility. Use the correct guard and follow the machine operating instructions.