750x80x305 14А Grinding wheel Type-1 F46 35 m/s on Ceramic bond K 6

In stock
SKU
311355-10006
$809.50
More Information
Bond Ceramic
Wheel type 1
D - top diameter 750
T - wheel thickness 80
H - hole diameter 305
Abrasive 14А
Grain it FEPA F46
Hardness K
Structure 6
Angle speed 35
Manufacturer ZAK
Country Ukraine

750×80×305 mm 14A Grinding Wheel – Type 1 – F46 – 35 m/s – Vitrified bond – Grade K – Structure 6

Type 1 abrasive grinding wheel (straight wheel) in size 750×80×305 mm.
A versatile geometry for peripheral grinding, sharpening, surface grinding or cylindrical grinding, subject to the machine setup.

Its working behaviour is defined by the combination of wheel profile, abrasive grain, grade and porosity.

What it actually does:

FEPA grit F46 positions this wheel for general roughing and semi-finishing.
For this specification, maintain a clean, open and correctly dressed wheel surface.

Abrasive 14A — regular aluminium oxide:

A tough aluminium oxide grain designed for productive grinding of materials with high tensile strength.

  • Carbon and low-alloy steels
  • Steel billets, forgings and castings
  • Rough and semi-finish grinding

FEPA grit size F46:

Medium grain size for bonded abrasive products.

  • Productive material removal
  • Suitable for establishing geometry
  • Leaves the surface ready for further finishing when tighter requirements apply

Vitrified bond:

  • Provides strong form retention
  • Can be dressed accurately
  • Its porous matrix helps remove chips and heat

Limitation: Vitrified wheels are sensitive to impact and unauthorised side loading.

In practice:

Stable quality requires correct balancing, minimal runout and consistent dressing between grinding cycles.

Specification:

  • Type: 1 (straight wheel)
  • Size: 750×80×305 mm
  • Outside diameter D: 750 mm
  • Wheel thickness T: 80 mm
  • Bore diameter H: 305 mm
  • Abrasive: 14A, regular aluminium oxide
  • Grit: FEPA F46
  • Wheel grade: K
  • Structure: 6
  • Bond: vitrified
  • Maximum operating speed: 35 m/s

Wheel grade K:

Medium-soft bond-holding characteristic.

  • Supports regular renewal of cutting edges
  • Performs well under moderate loading
  • Requires monitoring of wheel wear and profile retention

Structure 6:

Medium wheel structure.

  • Balanced grain and pore volume
  • Stable form retention
  • Predictable performance under consistent loading

Use for:

  • Peripheral grinding
  • Sharpening and sizing of working surfaces
  • Carbon and low-alloy steels
  • Steel billets, forgings and castings
  • Rough and semi-finish grinding

Do not use for:

  • Cemented carbide and technical ceramics
  • Precision grinding of hardened steel where a cooler-cutting friable grain is required
  • Side loading unless specifically permitted by the wheel design
  • Operation above 35 m/s

Before mounting, inspect the wheel for damage and confirm bore fit, mounting method and machine compatibility. Use the correct guard and follow the machine operating instructions.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
© Copyright - e-Store "Razvertka" Tokar tools - production and sale of tools You may not copy, reproduce, modify, publish, upload, transmit, and distribute any elements of this site, as well as their components, by any means and in any media without prior written permission.