We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
250x32x76 14А Grinding wheel Type-1 F100 35 m/s on Ceramic bond N 7
| Bond | Ceramic |
|---|---|
| Wheel type | 1 |
| D - top diameter | 250 |
| T - wheel thickness | 32 |
| H - hole diameter | 76 |
| Abrasive | 14А |
| Grain it FEPA | F100 |
| Hardness | N |
| Structure | 7 |
| Angle speed | 35 |
| Manufacturer | ZAK |
| Country | Ukraine |
250×32×76 mm 14A Grinding Wheel – Type 1 – F100 – 35 m/s – Vitrified bond – Grade N – Structure 7
Type 1 abrasive grinding wheel (straight wheel) in size 250×32×76 mm.
A versatile geometry for peripheral grinding, sharpening, surface grinding or cylindrical grinding, subject to the machine setup.
These parameters balance stock removal, wheel life and surface quality for the intended operation.
What it actually does:
FEPA grit F100 positions this wheel for finish grinding and final size correction.
For this specification, maintain a clean, open and correctly dressed wheel surface.
Abrasive 14A — regular aluminium oxide:
A tough aluminium oxide grain designed for productive grinding of materials with high tensile strength.
- Carbon and low-alloy steels
- Steel billets, forgings and castings
- Rough and semi-finish grinding
FEPA grit size F100:
Fine grain size for bonded abrasive products.
- Shallower grinding marks
- Controlled surface quality
- Requires stable feed and timely dressing
Vitrified bond:
- Provides strong form retention
- Can be dressed accurately
- Its porous matrix helps remove chips and heat
Limitation: Vitrified wheels are sensitive to impact and unauthorised side loading.
In practice:
Set the final operating parameters for the actual workpiece material and hardness without exceeding the marked wheel speed.
Specification:
- Type: 1 (straight wheel)
- Size: 250×32×76 mm
- Outside diameter D: 250 mm
- Wheel thickness T: 32 mm
- Bore diameter H: 76 mm
- Abrasive: 14A, regular aluminium oxide
- Grit: FEPA F100
- Wheel grade: N
- Structure: 7
- Bond: vitrified
- Maximum operating speed: 35 m/s
Wheel grade N:
Medium bond-holding characteristic.
- Balances self-sharpening and wheel life
- Stable performance with a consistent feed
- A versatile grade for steady grinding contact
Structure 7:
Moderately open wheel structure.
- More chip clearance
- Improved coolant access to the grinding zone
- Reduced risk of wheel loading during prolonged contact
Use for:
- Peripheral grinding
- Sharpening and sizing of working surfaces
- Carbon and low-alloy steels
- Steel billets, forgings and castings
- Rough and semi-finish grinding
Do not use for:
- Cemented carbide and technical ceramics
- Precision grinding of hardened steel where a cooler-cutting friable grain is required
- Side loading unless specifically permitted by the wheel design
- Operation above 35 m/s
Before mounting, inspect the wheel for damage and confirm bore fit, mounting method and machine compatibility. Use the correct guard and follow the machine operating instructions.