500x16x305 14А Grinding wheel Type-1 F80 50 m/s on Ceramic bond O 6

In stock
SKU
311346-10471
$55.16
More Information
Bond Ceramic
Wheel type 1
D - top diameter 500
T - wheel thickness 16
H - hole diameter 305
Abrasive 14А
Grain it FEPA F80
Hardness O
Structure 6
Angle speed 50
Manufacturer ZAK
Country Ukraine

500×16×305 mm 14A Grinding Wheel – Type 1 – F80 – 50 m/s – Vitrified bond – Grade O – Structure 6

Type 1 abrasive grinding wheel (straight wheel) in size 500×16×305 mm.
A versatile geometry for peripheral grinding, sharpening, surface grinding or cylindrical grinding, subject to the machine setup.

This specification is designed for controlled grinding based on the abrasive type, grit size, wheel grade and structure.

What it actually does:

FEPA grit F80 positions this wheel for finish grinding and final size correction.
For this specification, maintain a clean, open and correctly dressed wheel surface.

Abrasive 14A — regular aluminium oxide:

A tough aluminium oxide grain designed for productive grinding of materials with high tensile strength.

  • Carbon and low-alloy steels
  • Steel billets, forgings and castings
  • Rough and semi-finish grinding

FEPA grit size F80:

Fine grain size for bonded abrasive products.

  • Shallower grinding marks
  • Controlled surface quality
  • Requires stable feed and timely dressing

Vitrified bond:

  • Provides strong form retention
  • Can be dressed accurately
  • Its porous matrix helps remove chips and heat

Limitation: Vitrified wheels are sensitive to impact and unauthorised side loading.

In practice:

Use a grinding load that keeps the grains cutting rather than rubbing continuously against the workpiece.

Specification:

  • Type: 1 (straight wheel)
  • Size: 500×16×305 mm
  • Outside diameter D: 500 mm
  • Wheel thickness T: 16 mm
  • Bore diameter H: 305 mm
  • Abrasive: 14A, regular aluminium oxide
  • Grit: FEPA F80
  • Wheel grade: O
  • Structure: 6
  • Bond: vitrified
  • Maximum operating speed: 50 m/s

Wheel grade O:

Medium-hard bond-holding characteristic.

  • Retains abrasive grains more strongly
  • Maintains the working profile well
  • May glaze if the grinding load is too low

Structure 6:

Medium wheel structure.

  • Balanced grain and pore volume
  • Stable form retention
  • Predictable performance under consistent loading

Use for:

  • Peripheral grinding
  • Sharpening and sizing of working surfaces
  • Carbon and low-alloy steels
  • Steel billets, forgings and castings
  • Rough and semi-finish grinding

Do not use for:

  • Cemented carbide and technical ceramics
  • Precision grinding of hardened steel where a cooler-cutting friable grain is required
  • Side loading unless specifically permitted by the wheel design
  • Operation above 50 m/s

Before mounting, inspect the wheel for damage and confirm bore fit, mounting method and machine compatibility. Use the correct guard and follow the machine operating instructions.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
© Copyright - e-Store "Razvertka" Tokar tools - production and sale of tools You may not copy, reproduce, modify, publish, upload, transmit, and distribute any elements of this site, as well as their components, by any means and in any media without prior written permission.