We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
500x20x305 25А Grinding wheel Type-1 F80 60 m/s on Ceramic bond N 7
| Bond | Ceramic |
|---|---|
| Wheel type | 1 |
| D - top diameter | 500 |
| T - wheel thickness | 20 |
| H - hole diameter | 305 |
| Abrasive | 25А |
| Grain it FEPA | F80 |
| Hardness | N |
| Structure | 7 |
| Angle speed | 60 |
| Manufacturer | ZAK |
| Country | Ukraine |
500×20×305 mm 25A Grinding Wheel – Type 1 – F80 – 60 m/s – Vitrified bond – Grade N – Structure 7
Type 1 abrasive grinding wheel (straight wheel) in size 500×20×305 mm.
A versatile geometry for peripheral grinding, sharpening, surface grinding or cylindrical grinding, subject to the machine setup.
The wheel acts as a multi-point cutting tool and must be installed on equipment designed for its mounting profile.
What it actually does:
FEPA grit F80 positions this wheel for finish grinding and final size correction.
For this specification, maintain a clean, open and correctly dressed wheel surface.
Abrasive 25A — white fused aluminium oxide:
A high-purity, sharp and friable grain that renews its cutting edges and helps reduce the risk of thermal damage.
- Hardened and tool steels
- High-speed and alloy steels
- Precision grinding and tool sharpening
FEPA grit size F80:
Fine grain size for bonded abrasive products.
- Shallower grinding marks
- Controlled surface quality
- Requires stable feed and timely dressing
Vitrified bond:
- Provides strong form retention
- Can be dressed accurately
- Its porous matrix helps remove chips and heat
Limitation: Vitrified wheels are sensitive to impact and unauthorised side loading.
In practice:
Repeatable results depend on accurate dressing, system rigidity and a consistent feed rate.
Specification:
- Type: 1 (straight wheel)
- Size: 500×20×305 mm
- Outside diameter D: 500 mm
- Wheel thickness T: 20 mm
- Bore diameter H: 305 mm
- Abrasive: 25A, white fused aluminium oxide
- Grit: FEPA F80
- Wheel grade: N
- Structure: 7
- Bond: vitrified
- Maximum operating speed: 60 m/s
Wheel grade N:
Medium bond-holding characteristic.
- Balances self-sharpening and wheel life
- Stable performance with a consistent feed
- A versatile grade for steady grinding contact
Structure 7:
Moderately open wheel structure.
- More chip clearance
- Improved coolant access to the grinding zone
- Reduced risk of wheel loading during prolonged contact
Use for:
- Peripheral grinding
- Sharpening and sizing of working surfaces
- Hardened and tool steels
- High-speed and alloy steels
- Precision grinding and tool sharpening
Do not use for:
- Cemented carbide, glass and ceramics, where silicon carbide is generally more suitable
- Heavy snagging with severe impact loading
- Side loading unless specifically permitted by the wheel design
- Operation above 60 m/s
Before mounting, inspect the wheel for damage and confirm bore fit, mounting method and machine compatibility. Use the correct guard and follow the machine operating instructions.